Data Sheet

4D SYSTEMS 4.3” Bezel for the uLCD-43PT

4.3” Bezel for the uLCD

-43PT

ORDERING INFORMATION

Order Code:

4DBEZEL-43-B (Black Version)

4DBEZEL-43-W (White Version)

Packaging: Module sealed in antistatic foam padded 4D Systems Box

5. Legal Notice

Proprietary Information

The information contained in this document is the property of 4D Systems Pty. Ltd. and may be the subject of

patents pending or granted, and must not be copied or disclosed without prior written permission.

4D Systems endeavours to ensure that the information in this document is correct and fairly stated but does

not accept liability for any error or omission. The development of 4D Systems products and services is

continuous and published information may not be up to date. It is important to check the current position with

4D Systems. 4D Systems reserves the right to modify, update or makes changes to Specifications or written

material without prior notice at any time.

All trademarks belong to their respective owners and are recognised and acknowledged.

Disclaimer of Warranties & Limitation of Liability

4D Systems makes no warranty, either expressed or implied with respect to any product, and specifically

disclaims all other warranties, including, without limitation, warranties for merchantability, non-infringement

and fitness for any particular purpose.

Information contained in this publication regarding device applications and the like is provided only for your

convenience and may be superseded by updates. It is your responsibility to ensure that your application meets

with your specifications.

Images and graphics used throughout this document are for illustrative purposes only. All images and graphics

used are possible to be displayed on the 4D Systems range of products, however the quality may vary.

In no event shall 4D Systems be liable to the buyer or to any third party for any indirect, incidental, special,

consequential, punitive or exemplary damages (including without limitation lost profits, lost savings, or loss of

business opportunity) arising out of or relating to any product or service provided or to be provided by 4D

Systems, or the use or inability to use the same, even if 4D Systems has been advised of the possibility of such

damages.

4D Systems products are not fault tolerant nor designed, manufactured or intended for use or resale as on line

control equipment in hazardous environments requiring fail – safe performance, such as in the operation of

nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines

or weapons systems in which the failure of the product could lead directly to death, personal injury or severe

physical or environmental damage (‘High Risk Activities’). 4D Systems and its suppliers specifically disclaim

any expressed or implied warranty of fitness for High Risk Activities.

Use of 4D Systems’ products and devices in 'High Risk Activities' and in any other application is entirely at the

buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless 4D Systems from any and all

damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise,

under any 4D Systems intellectual property rights.

6. Contact Information

For Technical Support: support@4dsystems.com.au

For Sales Support: sales@4dsystems.com.au

Website: www.4dsystems.com.au