Data Sheet

4D SYSTEMS 4DPi-32-II Primary Display – Raspberry Pi Compatible
© 2018 4D SYSTEMS Page 13 of 18 www.4dsystems.com.au
4DPi
-32
-II Primary Display
– Raspberry
Pi
9. Specifications and Ratings
ABSOLUTE MAXIMUM RATINGS
Operating ambient temperature ................................................................................................... -15°C to +65°C
Storage temperature .......................................................................................................................... -30°C +70°C
NOTE: Stresses above those listed here may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at those or any other conditions above those indicated in the
recommended operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Parameter
Conditions
Min
Typ
Max
Units
Supply Voltage (+3.3V)
Stable external supply required
3.0
3.3
4.0
V
Supply Voltage (+5V)
Stable external supply required
4.5
5.0
5.5
V
Operating Temperature
-10
--
+60
°C
GLOBAL CHARACTERISTICS BASED ON OPERATING CONDITIONS
Parameter
Conditions
Min
Typ
Max
Units
Supply Current (ICC)
3.3V Supply
--
100
--
mA
Backlight Current (ICC)
5V Supply
--
150
--
mA
Display Endurance
Hours of operation, measured to when
display is 50% original brightness
--
20000
--
H
PERFORMANCE
Parameter
Conditions
Min
Typ
Max
Units
Frame Rate (FPS)
Video Playback, Full Screen, 320x240.
A higher FPS can be achieved if display
outputting lots of blocks of the same
colour. See Section 4.5
--
25
--
FPS
ORDERING INFORMATION
Order Code: 4DPi-32-II (Revision 2.x)
Packaging: Module sealed in a 4D Systems box