Manualshelf

Owners manual

ManualsBrands40B BLUEROCK ManualsPower Tool Accessories40B + 25 Belts Pipe Polisher Grind Sander BLUEROCK ® Tools Belts
12345678910
40B GRINDER/SANDER/POLISHER
6
Ø Turn the motor off.
o CAUTION: Only lay the machine down on surface once the belts have come to a complete stop.
INSTALLING SANDING BELTS
Ø Check that the replacement belt is not damaged.
o Sanding belts that are damaged should not be used.
Ø Make certain the machine is unplugged from power.
Ø Depress the spring arm (number 5 in the picture above) inwards and remove the old sanding belt.
Ø Place the new sanding belt on the rollers so it’s direction of circulation (arrows on the non-abrasive side of
the belt matches the arrow on the machine’s gearbox.
Ø Release the spring arm and ensure the belt is completely on the rollers.