Owner manual

ManualsBrands3xLOGIC ManualsVideoVISIX Camera

Visit our webpage for more info at: http://www.3xlogic.com

3xLOGIC Inc. Doc# 13111317 Page 1 of 10

Guide 130005

VISIX IP Setup Utility Quick Guide

Guide #:

130005-1

Date:

August 18, 2010

Revised:

November 13, 2013

Purpose:

The purpose of this guide is to inform a user on the basic usage of the

VISIX IP Setup Utility.

1 INTRODUCTION ......................................................................................................... 1

2 DOWNLOADING AND INSTALLING THE VISIX IP SETUP UTILITY ...................................... 2

2.1 DOWNLOADING THE VISIX IP SETUP UTILITY ............................................................................................ 2

2.2 INSTALLING THE VISIX IP SETUP UTILITY .................................................................................................. 2

3 USING THE VISIX IP SETUP UTILITY ............................................................................ 2

3.1 STARTING THE VISIX IP SETUP UTILITY .................................................................................................... 2

3.2 DETECTING CAMERAS WITH THE VISIX IP SETUP UTILITY .............................................................................. 2

3.3 CONFIRM/CHANGE THE IP ADDRESS ASSIGNED TO YOUR VISIX IP CAMERA ...................................................... 3

3.4 CONFIGURING SETTINGS FOR YOUR VISIX IP CAMERA ................................................................................. 4

3.5 CONFIRM ADVANCED OPTIONS FOR YOUR VISIX IP CAMERA ........................................................................ 5

3.6 SET/CONFIRM THE SUB-STREAM SETTINGS FOR YOUR VISIX IP CAMERA ......................................................... 6

4 LIVE VIDEO PREVIEW MODE ....................................................................................... 7

4.1 LIVE VIDEO PREVIEW MODE .................................................................................................................. 8

4.2 LIVE VIDEO PREVIEW – CCD SETTINGS ..................................................................................................... 9

5 CONTACT INFORMATION .......................................................................................... 10

1 Introduction

This quick guide will instruct a user on how to correctly install, run and operate the VISIX

(VISIX) IP Setup Utility.

The VISIX IP Setup Utility is an application designed to streamline the process of locating and

assigning VISIX brand cameras to VIGIL Server camera channels.

Summary of content (10 pages)

PAGE 1
Guide 130005 VISIX IP Setup Utility Quick Guide Guide #: Date: Revised: Purpose: 130005-1 August 18, 2010 November 13, 2013 The purpose of this guide is to inform a user on the basic usage of the VISIX IP Setup Utility. 1 INTRODUCTION ......................................................................................................... 1 2 DOWNLOADING AND INSTALLING THE VISIX IP SETUP UTILITY ...................................... 2 2.1 DOWNLOADING THE VISIX IP SETUP UTILITY ......................
PAGE 2
Downloading and Installing the VISIX IP Setup Utility 2.1 Downloading the VISIX IP Setup Utility To download the VISIX IP Setup utility, please visit the below link: 3xLOGIC Public FTP After the webpage loads, select Support Tools. From the Support Tools menu select VSXIPSetup file to begin your download. 2.2 Installing the VISIX IP Setup Utility The VISIX IP Setup Utility does not need to be installed like a traditional software application.
PAGE 3
.3 Confirm/Change the IP Address assigned to your VISIX IP camera After clicking Detect Online Devices/ Change IP Address on the main page you will be taken to the Online Devices window. To select a device, simply click on the desired device in the generated menu under the Select Online Devices area. To change an IP Address for any of your VISIX cameras from the Detect Online Devices window, click on the Change IP Address button.
PAGE 4
3.4 Configuring Settings for your VISIX IP Camera From the main-screen you can select and/or edit: Detect Online Devices Change IP Address Update Firmware Save Settings Save to VIGIL Reboot and Quit Detect Online Devices – Detect online VISIX devices on your network. Will open the Online Devices screen pictured in Section 3.3 Confirm/Change the IP Address assigned to your VISIX IP camera Change IP Address – Change the IP Address of the selected VISIX device.
PAGE 5
3.5 Confirm Advanced Options for your VISIX IP camera Click the Show Advanced Options button(circled above) in the top right corner to extend the mains screen to include advanced options. From here, you can select and/or edit: Resolution Bitrate Frames Per Second (FPS) I-Frame Intervals Use Audio Resolution – This will allow you to see the resolutions (minimum and maximum) this particular camera will support. Select from the list provided the resolution best suited for your application.
PAGE 6
3.6 Set/Confirm the Sub-Stream Settings for your VISIX IP camera In bottom portion of the Advanced Options section of the main screen is the SubStream settings. Resolution – CIF (352x240) Recommended setting. Frames Per Second (FPS) – Sub-stream viewing typically requires a faster frame rate. (e.g. 20 FPS) If all of your Settings are acceptable, click on Save Settings to save your settings to the camera you just setup.
PAGE 7
4 Live Video Preview Mode Live previewing of your selected camera’s feed is possible from the VISIX IP Setup Utility. This feature is useful for visually confirming the state of a camera feed before assigning it to your VIGIL Server channels. The Video Preview feature also enables the configuration of some in-camera settings on all VISIX cameras on your network without ever needing to use each individual camera’s web interface. To enable use of this feature, be sure to have a camera selected.
PAGE 8
4.1 Live Video Preview Mode Pictured below is the Video Preview Window. From the right hand side of the Video Preview window the selected camera’s PTZ controls can be accessed as well as some of the camera’s basic CCD settings. On-Screen Menu/PTZ Menu On Up/Right/Down/Left/Set Zoom In/Zoom Out Focus Near/Focus Far Iris Close/Iris Open Auto Focus Lens Reset CCD Settings Channel Select Sub Stream Select Play/Stop 3xLOGIC Inc. Opens the in-camera settings menu if available.
PAGE 9
4.2 Live Video Preview – CCD Settings Click CCD settings(circled below-right) on the Live Video Preview screen to open the CCD Settings window. CCD Settings Image Settings White Balance Day/Night Exposure Misc Adjust the brightness, contrast, hue and saturation of the camera feed’s picture. . Adjust white balance settings if supported by current device. Adjust day/night settings to improve picture quality under specific lighting conditions. Adjust Exposure time or select Iris mode.
PAGE 10
5 Contact Information If you require more information, or if you have any questions or concerns, please contact 3xLOGIC Technical Support: Toll Free (North America): (877) 3XLOGIC or (877) 395-6442 Email: support@3xlogic.com Online: www.3xlogic.com HU U HU 3xLOGIC Inc. U Visit our webpage for more info at: http://www.3xlogic.