Owner's manual
Table Of Contents
- 1 Introduction
- 2 Using View Lite with an Apple iOS Device
- 2.1 Installing 3xLOGIC's View Lite on your Device
- 2.2 View Lite Main Screen
- 2.3 Adding VIGIL Servers/3xCLOUD Accounts to View Lite
- 2.4 Viewing Live Video with View Lite on your iOS Device
- 2.5 Saving and Loading Views on View Lite
- 2.6 Using Layouts on View Lite
- 2.7 Searching and Viewing Playback on View Lite
- 2.8 Searching and Viewing POS Data
- 2.9 View Lite Settings
- 3 Using View Lite with an Android OS Device
- 4 Contact Information

2.4.2 Using PTZ With Live Video (iOS)
3xLOGIC View Lite has the ability to access a camera's PTZ controls when a capable camera is in full screen mode.
To access PTZ:
l
Tap the button(PTZ Controls) in the lower left-hand corner of the screen when in live full screen mode. The PTZ controls
will appear as pictured below.
l Use the directional controls to move the camera in the corresponding direction. The + and - controls at the center of the PTZ
control panel are used to operate zoom.
l To access PTZ Presets, tap the Presets button(circled in red, above-left.)This button will only generate when the PTZ controls
are open. Tapping it will cause the PTZ control keypad to convert to a number list(above-right.)
l Select a number and the camera will move to the preset location assigned to that number.
l When you have achieved your desired camera position, via manual PTZ control or a PTZ preset, tap outside of the PTZ or Pre-
set control pad to leave PTZ mode.
l Tap the full-screen stream to return to the 3xLOGIC View Lite main screen and your full camera layout.
©2014 3xLOGIC Inc. | View Lite Smart Device Application - User Guide -9-