User's Manual

Remove enough of the center raised boss (Figure 2) until the boss is lower that
the surrounding raised rib.
Reinstall top rail guides, this completes the cover modification.
3.0 Modify bottom guide
Remove the two, green, guide securing screws. Remove the right bottom
currency guide and cut away 47mm of the front vertical portion flush with the
horizontal portion (Figure 3).
Figure 3
Reinstall the currency guides, do not reinstall green
securing screws.
Remove
Remove
47mm
4.0 Clean Securing Pad Mounting Area
Thoroughly clean the area identified in Figure 4 with an alcohol wipe.
Figure 4
C
L
E
A
N
Page I4Octopus ATM Defense System
Installation and Operation Guide