User's Manual

11.0 Clean Cassette Bracket Mounting area
Temporarily place the bracket assembly in the cassette(Figure 9) note where
the bracket bottom flange touches the cassette bottom. Remove the bracket
and thoroughly clean the area with the alcohol wipes.
12.0 Install Bracket Assembly
Remove the release paper from bracket flange and install the bracket making
sure that the bracket assembly clears the green latching mechanism on the
front of the cassette. Install the two screws and tighten to secure the bracket.
Figure 9
Clean area
with alcohol
Screws
Octopus ATM Defense System
Installation and Operation Guide
Page H7