User Guide

■ III-6. WCL03 SERIES OPTIONAL PARTS INSTALLATION ( Coolant Flow )
제품 구성 후 반드시 전원을 연결해 작동액 순환상태, 누수상태, 등을 시험 후 10분 이상 시운전 하고 PC에 장착 하십시오.
Pump Unit 내부에 기포가 많이 있으면 순환이 되지 않을 수 있으니 전원 연결 시험 시 기포를 제거 하십시오
After assembly, and before installing, operate the cooler for more than 10 minutes to check that the liquid circulates normally without any trace of leakage.
(Residual bubbles inside of the pump unit hinders the circulation of the liquid. Remove the bubbles while testing.
SETUP EXAMPLE 1
RADIATOR CPU WATER BLOCK
PUMP UNIT
FAN (AIR)
CPU
WATER TANK
CHIPSET
VGA
RADIATOR
CPU WATER BLOCK
PUMP UNIT
FAN (AIR)
CPU
WATER BLOCK
RADIATOR
FAN (AIR)
SETUP EXAMPLE 3
TANK & PUMP
RADIATOR
CPU WATER BLOCK
PUMP UNIT
FAN (AIR)
CPU
WATER TANK
VGA CHIPSET
RADIATOR
FAN (AIR)
TANK & PUMP
SETUP EXAMPLE 4
RADIATOR
CPU WATER BLOCK
PUMP UNIT
FAN (AIR)
CPU
WATER TANK
CHIPSET
RADIATOR
FAN (AIR)
TANK & PUMP
SETUP EXAMPLE 2
Chipset Water Block
Pump & Water Tank
Pump & Water Tank
Pump & Water Tank
Chipset Water Block
Chipset Water Block
VGA Water Block
VGA Water Block
External 120mm Radiator
External 120mm Radiator
External 120mm Radiator