Users Manual

Polychromatic spectrophotometers are widely used in plastics, electronics, paint and ink, textile and garment printing and dyeing,
printed paper, automobile, medical, cosmetics and food industries. The instrument is equipped with high-end color management
software, which can be connected to a computer to achieve more functional expansion.
MS3012Product parameters
Measuring geometry
Color measurement role
Standards compliant
characteristic
Lighting source
Lighting source life
Spectroscopic method
detector
wavelength range
wavelength spacing
Measuring range
half width
Measuring diameter
color space
Color difference formula
Other indicators
Observer's point of view
Observation light source
show
measure time
color repeatability
color reproducibility
Differ instruments
Effect parameters
Effect measurement
effect repeatability
effect reproducibility
Trigger method
measurement method
Targeting
size
weight
battery power
display
interface
Storing data
language
calibration
Calibration interval
Standard accessories
Optional accessories
12 measuring angles (7 light sources, 2 receivers)
45° receiver: 45as-15°, 45as15°, 45as25°, 45as45°, 45as75°, 45as110° 15° receiver: 15as-45°, 15as-15°, 15as15°, 15as- 30°,15as45°,15as80°
ASTMD2244,E308,E1164,E2194,E2539,DIN5033,5036,6174,6175-1,6175-2;ISO7724,11664-4，SAEJ1545
Accurate and consistent color measurement for metallic, pearlescent, and other complex special-effect color products
Blue light-enhanced full-spectrum LEDs
5 years 3 million measurements
Concave grating
256-element dual-array CMOS image sensor
400nm-700nm
10nm
0~600%
10nm
Φ12mm
CIELAB,XYZ,Yxy,LCh,βxy,DINLab99
ΔE*ab,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*00,DINΔE99,ΔEDIN6175
FlopIndex,Radiation intensity value
2°/10°
D65,A,C,D50,D55,D75,F1,F2(CWF),F3,F4,F5,F6,F7(DLF),F8,F9,F10(TPL5),F11(TL84),F12(TL83/U30)
Spectrum graph/data, sample color value, color difference value/graph, pass/fail result, color simulation, sample effect value, effect difference value
The measurement time of a single angle is about 1s, and the measurement of all the angles takes about 12s
Spectral reflectance: standard deviation within 0.08%, chromaticity value: 0.02 ΔE*ab (after the instrument is warmed up and calibrated, the average value of 30 times)
△E*<0.10, average on grey BCRA panels, △E*<0.25, the average value on the color BCRA plate
0.18 E*0.0 BCRA series Ⅱ 12 pieces of color plate measurement average
Flicker, Color Flicker, Granularity
6 degrees of flicker, color flicker data: 15as-45°, 15as-30°, 15as-15°, 15as15°, 15as45°, 15as80°, 15d diffuse particle size
Short-term repeatability of flicker: 0.12% (standard deviation of 10 times), (after the instrument is warmed up and calibrated, the average value of 10 times of color
plate measurement),Short-term repeatability of particle size: 0.09% (standard deviation of 10 times) (measurement of color plate 10 times the average)
Scintillation reproducibility: 1.9% particle size reproducibility: 1.4%
Pressure sensitive trigger, button trigger, software trigger
Single measurement, average measurement (1~99 times), continuous measurement (1~99 times)
Color camera preview
Length x width x height =195X83X128mm
about 1Kg
Lithium battery, 3.7V, 3200mAh, can test 6000 times continuously within 8 hours after full charge
TFT true color 3.5inch, capacitive touch screen
USB,BT
1000 standard samples, 4000 samples
Chinese (Simplified, Traditional) English
Built-in white board parameters, external white board, black light trap, color board
4h,8h,24h,Power-on calibration
Power adapter, data cable, manual, quality management software (download from official website), calibration box, black light trap, protective cover, wrist strap
micro printer
plastic
Paint/Ink
print
Car textile
food and drug
other
Shenzhen ThreeNH Technology Co.,Ltd
Floor 6, Building 5B, Skyworth Innovation Valley, Tangtou No.1
Road, Shiyan Street, Bao an District, Shenzhen, Guangdong, China
TEL:[phone](20) FAX:[phone]
Email：[e-mail] Web：www.3nh.com
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.