User's Manual

2.5 Quality management software installation
The instrument can establish a connection with the PC-side SQCX quality management
software through a USB data cable or a Bluetooth module (only for products equipped with a
Bluetooth module) to communicate and achieve more functional expansion. The
measurement interface of the instrument connected to the PC is shown in Figure 8.
Figure 8 The measurement interface of the instrument connected to the PC
2.6 Measurement
Standard sample measurement and sample measurement can be realized by instruments,
and other chromaticity indexes can be realized by mobile phone APP and SQCX PC
software.
2.6.1 Stand-alone standard sample measurement
In the standard sample measurement interface, align the measurement aperture to the
standard sample and press the "measurement button" shortly. The instrument obtains the
chromaticity data of the standard sample, as shown in Figure 9. The green indicator LED
flashes once when the measurement is completed. The status bar at the top of the
instrument screen displays the current measurement conditions, the icon at the bottom
displays the USB and Bluetooth connection status, and "01" in the lower right corner
indicates the current standard number. The number of the stand-alone standard samples is
from 01 to 10. When the standard sample data is full of 10, the system will prompt whether to
clear the standard sample again. After clearing, the measurement can be continued. After
the standard sample is cleared, the sample associated with the standard sample will also be
cleared. Slide the operation button to the left or right to view the target data.