User Guide

60
Maintenance
4.
Apply a vacuum cleaner to the air fi lter
and the fi lter cover. Please replace the air
fi lter when it is damaged or too soiled.
5.
Replace the air fi lter in its original
position. Secure the air fi lter in place by
pressing each of the six locations.
Make sure there is no dust or dirt
remaining after the cover is in place. If any
dust or dirt remains use a vacuum cleaner
to remove it as when placing the fi lter
cover on the air fi lter.
Reattach the fi lter cover to the projector by
aligning the fi lter cover with the grooves
on the projector. While holding the handle,
push down on the fi lter cover until it locks
fi rmly in place.
6.
Turn the projector on and reset the fi lter
time using the FILTER TIME function in the
OPTION menu
(


43)
.
(1) Press the MENU button to display a menu. When the EASY MENU has
appeared, please skip the next step (2).
(2) Point at the “OPTION” in the left column of the menu using ▼/▲ button, then
press the ► button.
(3) Point at the “FILTER TIME” using ▼/▲ button, then press the ► button. A
dialog will appear.
(4) Press the ▲ button to select “RESET” on the dialog. It performs resetting the
fi lter time.
Air fi lter (continued)
Filter cover
Air fi lter
Air fi lter’s
knob
mark