Operation Manual

1
TECHNICAL
TECHNICAL
SIGNAL CONNECTOR PIN ASSIGNMENT
rgb in [1]/[2]
rgb out
D-sub 15-pin Shrink Mini Din 4-pin
s-video
Mini Din 4-pin
Pin No Signal
1
Color:
0.286Vp-p (NTSC, burst signal),
75Ω terminator
0.3Vp-p (PAL/SECAM, burst signal),
75Ω terminator
2
Brightness:
1.0Vp-p, 75Ω terminator
3 Ground
4 Ground
signal Terminal Specification
RGB signal
input
rgb in（1、2）
Video: Analog 0.7Vp-p, 75Ω terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
Video signal
input
video in 1.0Vp-p, 75Ω terminator, RCA jack
s-video in
Brightness signal: 1.0Vp-p, 75Ω terminator
Color signal: 0.286Vp-p (NTSC, burst signal),75Ω terminator
0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator
Mini DIN 4-pin jack
component
video
Y 1.0 Vp-p, 75 Ω Terminator (Positive)
CB/PB 0.7 Vp-p, 75 Ω Terminator (Positive)
CR/PR 0.7 Vp-p, 75 Ω Terminator (Positive)
Audio
signal input
audio in（R、L）
200mVrms, 50 kΩ (max. 3.0Vp-p)
RCA jack
Signal output rgb out
Video: Analog 0.7Vp-p, 75Ω output impedance (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
Pin No Signal Pin No Signal
1 Video input Red 9 -
2 Video input Green 10 Ground
3 Video input Blue 11 -
4 -
12
rgb in [1]: SDA (DDC)
5 Ground rgb in [2]: -
6 Ground Red rgb out : -
7 Ground Green 13 H. sync./ Composite sync.
8 Ground Blue 14 Vertical sync
15
rgb in [1]: SCL (DDC)
rgb in [2]: -
rgb out : -
CP-S318/328W/TECHNICAl責了 03.5.27 2:39 PM ページ 1
© 3M 2003 3M™ Digital Projector S/X50