Datasheet

3M
™
SecureFit
™
Safety Helmet X5000/X5500
3M United Kingdom PLC
Pimbo Road, Skelmersdale
Lancashire, WN8 9RA
t: 01695 711711
www.3MScott.com
Important notice
The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any
use of this product it is recommended to complete some trials to validate the performance of the product within its expected application.
All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage
of this product made in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules,
procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify
orcontrol those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation.
Personal Protective Equipment is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to Physical Hazards. 3M offers advice on the selection
of products, and training in the correct fitting and usage. For more information on 3M products and services please contact 3M.
Personal Safety Division
3M United Kingdom PLC
3M Centre
Cain Road, Bracknell
Berkshire RG12 8HT
t: 0870 60 800 60
www.3M.eu/PPEsafety
Please recycle. Printed in the UK. © 3M 2019. 3M, SecureFit and
UVicatoraretrademarks of 3M Company. All rights reserved. J446113
Product classification
X5500V X5000V X5000VE
EN 397:2012
+A1:2012
✓ ✓ ✓ ✓
-30°C ✓ ✓ ✓ ✓
MM ✓
LD ✓ ✓ ✓ ✓
440V ✓
EN 12492:2012 ✓ ✓
EN 50365:2002
(1000Vac)
✓ ✓
Accessories
X5500V X5000V X5000VE
3M Hearing
protectors
✓ ✓ ✓ ✓
3M Faceshields ✓ ✓ ✓ ✓
V9 Integrated
eyewear
✓ ✓ ✓ ✓
X5-4PTSUS ✓ ✓ X X
X5-6PTSUS ✓ ✓ ✓ ✓
X5-6PTSTRAP ✓ ✓ ✓ ✓
X5-S4PTCS1 ✓ ✓ X X
X5-S4PTCS2 X X ✓ ✓
X5-P4PTCS1 X ✓ X X
X5-P4PTCS2 X X ✓ X
X5-LAMPHLDR ✓ ✓ ✓ ✓
X5-IDHLDR ✓ ✓ ✓ ✓
X5-REFKIT X ✓ ✓ X
U5B ✓ ✓ ✓ ✓
P3EV/2 ✓ ✓ ✓ ✓
X5-S4PTCS1 = chin strap with plastic buckle
X5-S4PTCS2 = chin strap with plastic buckle
and EN standard selector
X5-P4PTCS1 = chin strap with magnetic buckle
X5-P4PTCS2 = chin strap with magnetic buckle
and EN standard selector
P3EV/2 = adaptor for visor attachment
X5-6PTSTRAP = 6-point suspension strap
X5-4PTSUS = 4-point suspension
X5-6PTSUS = 6-point suspension
X5-REFKIT = reflective sticker kit
X5-LAMPHLDR = mining lamp holder
X5-IDHLDR = ID badge holder
U5B = faceshield holder
Materials
Component
Material
Shell UV Stabilised ABS
Headband HDPE
Cradle Polyester
Sweatband Coated foam
Use and storage
Temperature range for usage -30°C to +50°C
Recommended storage
conditions
+3°C to +40°C, <85% humidity
Maximum recommended
product life
Up to 5 years from date
ofmanufacture*
* The product life as defined above is indicative data. The product life is subject to many
external and non-controllable factors and should not be interpreted as a warranty.
Fitting sizes Weight
Ratchet harness = 50-63cm
Use limitation
Ŕ Never modify or alter the safety helmet
Ŕ Do not use this safety helmet against hazards other than those
specified in the user instruction
Ŕ Use, store and maintain the safety helmet in accordance with the
user instruction
Testing and approval
The 3M
™
X5000 and X5500 SecureFit
™
Safety Helmets meet the
requirements of the PPE Regulation (EU) 2016/425 and are thus
CE marked. The products have been tested and approved by BSI,
Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP,
UK, Notified Body No. 0086.
X5500 has been tested and approved in accordance with
EN397:2012+A1:2012. X5000 has been tested and approved
inaccordance with EN 397:2012+A1:2012 and with EN 12492:2012.
Certain versions of X5500 and X5000 have been tested and
approved in accordance with EN 50365:2002.
✓ = approved
X = not approved
X5500NVE
X5500NVE
X5000V = 406g
X5500NVE = 351g