Datasheet

3M
™
Industrial Safety Helmet G3000/G3001
3M Personal Safety Division
3M United Kingdom PLC
3M Centre Cain Road
Bracknell, Berkshire, RG12 8HT
0870 60 800 60
www.3M.eu/safety
Please recycle. Printed in the UK. © 3M 2019.
All rights reserved. 3M, PELTOR and Uvicator
are trademarks of 3M Company. J468246
3M Ireland Limited
The Iveagh Building,
The Park, Carrickmines
Dublin 18
1 800 320 500
Materials
Component Material
Shell UV Stabilised ABS
Headband HDPE
Cradle Polyester
Sweatband Leather or plastic (PVC coated foam)
Use and storage
Temperature range for usage -30°C to +50°C
Recommended storage conditions +3°C to +40°C
<85% humidity
Maximum recommended
product life
Up to 5 years from
date of manufacture
*
*
The product life as defined above is indicative data. The product life is subject
to many external and non-controllable factors and should not be interpreted
as a warranty
Weight
G3000 Shell = 258g
G3001 Shell = 261g
G2M Rachet Suspension = 81g
Product configuration
Helmet shell
G3000 With ventilation
G3001 Without ventilation
Fitting sizes
Pinlock harness 54-62cm
Ratchet harness 53-62cm
The 3M
™
M-956 size reducing comfort pad is available as
an option for use with the ratchet harness.
Suspension
G2C 4 point pinlock headband with plastic sweatband
G2D 4 point pinlock headband with leather sweatband
G2M 4 point ratchet headband with leather sweatband
G2N 4 point ratchet headband with plastic sweatband
Product classification
Additional protection characteristics (according to EN 397:2012+A1:2012)
Low temperatures High temperatures Electrical properties
Lateral
deformation
-10°C -20°C -30°C +50°C +150°C
Molten
metal
440Vac
**
1000Vac/
1500Vdc
**
LD
✓ ✓ ✓ ✓ ✕ ✓ ✓ ✓ ✕
**
Properties available on non-vented shell models G3001
Important notice
The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent
professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application.
All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or
environment. Any action or usage of this product made in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional
guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be
observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which
remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty
or compensation.
Personal Protective Equipment is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to Physical Hazards.
3M offers advice on the selection of products, and training in the correct fitting and usage.
For more information on 3M products and services please contact 3M.