SDS

3M™ Wood Filler - Stainable and Colors 10/10/14
__________________________________________________________________________________________
Page 3 of 10
Skin Contact:
Wash with soap and water. If signs/symptoms develop, get medical attention.
Eye Contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.
If Swallowed:
Rinse mouth. If you are concerned, get medical advice.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.
4.3. Indication of any immediate medical attention and special treatment required
Not applicable.
SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing media
Material will not burn. Non-combustible. Use a fire fighting agent suitable for surrounding fire.
5.2. Special hazards arising from the substance or mixture
None inherent in this product.
Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide During Combustion
Carbon dioxide During Combustion
5.3. Special protective actions for fire-fighters
No special protective actions for fire-fighters are anticipated.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Eliminate all ignition sources if safe to do so. Ventilate the area with fresh air. For large spill, or spills in confined spaces,
provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning!
A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Refer to
other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and
personal protective equipment.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic
absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not
remove a physical, health, or environmental hazard. Place in a closed container approved for transportation by appropriate
authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area
with fresh air. Read and follow safety precautions on the solvent label and SDS. Seal the container. Dispose of collected
material as soon as possible.
SECTION 7: Handling and storage