Brochure

3M
™
Scotchlok
™
Tap Connector UG
The UG connector is a sealed two-wire connector for solid copper, air core, or filled cable.
The connector is filled with a sealant to provide moisture resistance. 3M
™
Scotchlok
™
Butt
Connector UP2. RUS Listed.
3M
™
Scotchlok
™
Tap Connector UPB
The UPB connector is a dry, flame-retardant two-wire UL-Listed connector with a pre-crimp
feature for use on pulp, paper or PIC cable where moisture resistance is not needed. RUS Listed.
3M
™
Scotchlok
™
Tap Connector UB2A/UB2A-D
The UB2A/UB2A-D connectors have a pre-crimp feature that gives the craftsperson a
time-saving edge. By positioning the connector on the conductor and pre-crimping, the
conductor is prevented from slipping out of the connector before the crimp is completed.
A factory sealant protects against corrosion and seals out moisture. In ready-access closures,
these connectors help eliminate cutting cable pairs, opening circuits, and piecing out wires. The
UB2A-D connector is a dry version of the UB2A. RUS Listed.
3M
™
Scotchlok
™
Tap Connectors
Scotchlok tap connectors are real time savers. They enable the user to tap into another wire without interrupting service.
A U-shaped element inside each connector displaces insulation material and makes contact with the copper conductor.
Scotchlok tap connectors also include factory-installed sealant to protect against corrosion and seal out moisture. They are
also available in a dry version for central office and vault. Scotchlok tap connectors are fast to install, easy to work with and
available in a wide range of common wire gauges. Tap connectors allow direct tapping into existing solid copper conductors
without interrupting service. The pre-crimp feature helps hold the wires in place until the connector is crimped and the
splice is complete.