Brochure

3M
™
Scotchlok
™
Butt Connector UYF (OUS only)
The UYF connector employs a specially designed insulation displacement contact which makes
an electrical connection to each wire. The connector is filled with a sealant to provide moisture
resistance. The small size of the UYF connector reduces the splicing bundle O.D. to a minimum.
3M
™
Scotchlok
™
Butt Connector UP2
The UP2 connector is a dry, flame-retardant two-wire UL-Listed connector for use on paper,
pulp or PIC cable where moisture resistance is not needed. RUS Listed.
3M
™
Scotchlok
™
Clearing Cap UCC
Each moisture-resistant UCC clearing cap isolates a full cable pair. The conductors are held
rigidly in place with a plastic blade. The UCC accepts two-wire combinations. RUS Listed.
3M
™
Scotchlok
™
Trim-out Connector 211
The 211 trim-out connector is a moisture-resistant, self-stripping insulation displacement
connector with a built-in cut-off blade and a test port. Wires are positioned in the connector from
the sides, allowing the 211 connector to be used without interrupting service. The 211 connector
may also be used for standard two-wire butt type splicing operations. RUS Listed.
3M
™
Scotchlok
™
Butt Connector UP3
The UP3 connector is a dry, flame-retardant two- or three-wire connector for paper, pulp or PIC
cable where moisture resistance is not needed. UL Listed.
3M
™
Scotchlok
™
Self-Stripping Dropwire Connector 557TG
Use the 557TG aerial dropwire connector to electrically connect two solid copper conductors,
insulate the connection and provide moisture protection.
3M
™
Scotchlok
™
Clearing Cap UPC
The UPC connector is a UL-listed dry, flame-retardant version of the UCC clearing cap making
it suitable for use in buildings. RUS Listed.