Datasheet

3M
™
Versaflo
™
TR-300+
Powered Air Turbo
Technical datasheet
Description
The 3M
™
Versaflo
™
TR-300+ Powered Air Turbo is a belt-
mounted air purifying device. When combined with one of the
3M approved headtops, it forms a power-assisted system for
respiratory protection against particles (and nuisance odour
where applicable). The TR-300+ Powered Air Turbo can be
used with the 3M
™
Versaflo
™
S-Series Hoods and Headcovers,
3M
™
Versaflo
™
M-Series Faceshields and Helmets.
• Two user selectable flow rates
• Controlled airflow delivers steady flow as battery discharges
or filters loads with particulates
• Display shows battery charge status, selected airflow
and particulate filter loading status during use
• Audible and LED alarm signals low battery charge
or low airflow
• Three filter options available:
• Particulate only
• Particulate plus nuisance level organic gas and vapours*
below the Workplace Exposure Limit (WEL)
• Particulate plus nuisance level acid gas* below the WEL
andoffers protection against hydrogen fluoride up to 10 x
WEL
• Lithium ion battery with LED to indicate charge status
• Three belt options (standard, easy-clean and leather)
for a range of applications
• Suitable for use in decontamination shower (IP 53)
*Nuisance level refers to concentrations below the Workplace Exposure Limit
Standards and approvals
The TR-300+ Powered Air Turbo, in combination with
3M approved headtops, has been tested and approved
to EN 12941:1998+A2:2008. The TR-300+ Powered Air Turbo
also meets the dust protection and spraying water requirements
(IP 53) of EN 60529.
• Dust protection and protection against spraying water
to EN 60529 IP 53.
The Certificate and Declaration of Conformity are available
at the following website www.3M.com/Respiratory/certs
Note: This product also complies with the European EMC
Directive 2014/30/EU.
Applications
The TR-300+ Powered Air Turbo, when used as part
of an approved system with appropriate filters, provides
protection against:
• Particles e.g. fine dusts, mists and metal fume.
• Nuisance odour levels (below the Workplace Exposure
Limit) of organic gas and vapours
• Nuisance odour levels (below the Workplace Exposure
Limit) of acid gases and up to 10 x Workplace Exposure
Limit of hydrogen fluoride.
The TR-300+, when used with an appropriate 3M headtop
and filters, may be used in various applications including:
• Agriculture
• Chemical industry
• Construction and building renovation
• Demolition
• Food and beverage
• Medical and healthcare
• Metalworking
• Pharmaceutical manufacturing
• Pulp and paper processing
• Smelting and foundries
• Surface preparation
• Woodworking