Datasheet

(2)
3M
™
Thermally Conductive Epoxy Adhesive TC-2810
Typical Cured Properties
Note: The following technical information and data should be considered representative or typical only, and should not
be used for specification purposes.
Product 3M™ Thermally Conductive Epoxy Adhesive TC-2810
Color Cream
Glass Transition Temperature See Chart on page 3
Thermal Coefficient of Expansion
62 x 10
-6
/°C (below T
g
)
205 x 10
-6
/°C (above T
g
)
Thermal Conductivity* 0.80 - 1.4 W/m-°K
Thermal Impedance** 0.05°C in
2
/W (2 mil)
Volume Resistivity 7.58 x 10
12
ohm-cm
Dielectric Strength 750 volts/mil
Dielectric Constant 4.6
Dissipation Factor .09
Total Outgassing <25 µg/g (GC/MS, 85°C/3 hours)
Hydrocarbon Outgassing <25 µg/g (GC/MS, 85°C/3 hours)
Siloxane Outgassing <5 µg/g (GC/MS, 85°C/3 hours)
Extractable Chloride <30 µg/g (hexane extraction)
* Test method dependent.
** Impedance value corrected for interfacial impedance of test method.