Datasheet

3M Thermally Conductive Adhesive TC-2810 (Part A)
__________________________________________________________________________________________
Page: 14 of 17
No information available.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
See Section 11.1 Information on toxicological effects
Dispose of completely cured (or polymerised) material in a permitted industrial waste facility. As a disposal alternative,
incinerate uncured product in a permitted waste incineration facility. Proper destruction may require the use of additional fuel
during incineration processes. If no other disposal options are available, waste product that has been completely cured or
polymerised may be placed in a landfill properly designed for industrial waste. Empty drums/barrels/containers used for
transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per
applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by
applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and
disposal facilities.
The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of
3M, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC - 2000/532/EC
and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional regulations are
complied with and always use a licensed waste contractor.
EU waste code (product as sold)
08 04 09* Waste adhesives and sealants containing organic solvents or other dangerous substances
20 01 27* Paint, inks, adhesives and resins containing dangerous substances
SECTION 14: Transportation information
ADR: UN3267; Corrosive liquid, basic, organic, N.O.S., (contains 4,7,10-trioxatridecane-1,13-diamine and
3,3'Oxybis(ethyleneoxy)bis(propylamine)); 8; II; C7.
IMDG: UN3267; Corrosive liquid, basic, organic, N.O.S., (contains 4,7,10-trioxatridecane-1,13-diamine and
3,3'Oxybis(ethyleneoxy)bis(propylamine)); 8; II; EmS FA,SB.
IATA: UN3267; Corrosive liquid, basic, organic, N.O.S., (contains 4,7,10-trioxatridecane-1,13-diamine and
3,3'Oxybis(ethyleneoxy)bis(propylamine)); 8; II.
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Global inventory status
Contact 3M for more information. The components of this material are in compliance with the China "Measures on
Environmental Management of New Chemical Substance". Certain restrictions may apply. Contact the selling division for
additional information. The components of this material are in compliance with the provisions of the Korean Toxic Chemical
Control Law. Certain restrictions may apply. Contact the selling division for additional information. The components of this
material are in compliance with the provisions of Australia National Industrial Chemical Notification and Assessment
Scheme (NICNAS). Certain restrictions may apply. Contact the selling division for additional information. The components
of this material are in compliance with the provisions of Philippines RA 6969 requirements. Certain restrictions may apply.
Contact the selling division for additional information. The components of this product are in compliance with the new
substance notification requirements of CEPA. The components of this product are in compliance with the chemical
notification requirements of TSCA.
15.2. Chemical Safety Assessment
Not applicable
SECTION 16: Other information