3M Thermally Conductive Adhesive TC-2810 Safety Data Sheet Copyright, 2014, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M Thermally Conductive Adhesive TC-2810 ICAO/IATA: UN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (CONTAINS 4,7,10-TRIOXATRIDECANE1,13-DIAMINE3,3'Oxybis(ethyleneoxy)bis(propylamine)), 8., II . Component 2 ADR/RID: NOT RESTRICTED FOR ROAD (ADR/RID), (--). IMDG-CODE: NOT RESTRICTED FOR TRANSPORTATION FOR IMDG/GGVSEE, IMDG-Code segregation code: NONE, EMS: --. ICAO/IATA: NOT RESTRICTED FOR AIR SHIPMENT. KIT LABEL 2.2.
M Thermally Conductive Adhesive TC-2810 Symbol(s) Corrosive Dangerous for the environment Contains: Consult the component labels for disclosable ingredients. Risk phrases R34 R43 R51/53 Safety phrases S23A S36/37/39B S26 S28C S45 S61 Causes burns. May cause sensitisation by skin contact. Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. Do not breathe vapour. Wear suitable protective clothing, gloves, and eye and face protection.
3M Thermally Conductive Adhesive TC-2810 Label: CLP Precautionary - Prevention - Header information was added. Label: CLP Precautionary - Response information was added. Label: CLP Precautionary - Response - Header information was added. Label: Precautionary Statement - Header information was added. Section 2: 2.2 & 2.3. CLP REGULATION heading information was added.
3M Thermally Conductive Adhesive TC-2810 (Part A) Safety Data Sheet Copyright, 2014, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M Thermally Conductive Adhesive TC-2810 (Part A) For full text of R phrases, see Section 16. 2.2. Label elements CLP REGULATION (EC) No 1272/2008 SIGNAL WORD DANGER! Symbols: GHS05 (Corrosion) | GHS07 (Exclamation mark) | Pictograms Ingredient 3,3'-oxybis(ethyleneoxy)bis(propylamine) 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro2,3-epoxypropane CAS Nbr 4246-51-9 25068-38-6 HAZARD STATEMENTS: H314 H317 Causes severe skin burns and eye damage.
3M Thermally Conductive Adhesive TC-2810 (Part A) <=125 ml Precautionary statements Prevention: P260 P280D Response: P303 + P361 + P353 P305 + P351 + P338 P310 P333 + P313 Do not breathe dust/fume/gas/mist/vapours/spray. Wear protective gloves, protective clothing, and eye/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
3M Thermally Conductive Adhesive TC-2810 (Part A) SECTION 3: Composition/information on ingredients Ingredient Boron Nitride (BN) CAS Nbr 10043-11-5 3,3'-oxybis(ethyleneoxy)bis(propylamine) 4246-51-9 EU Inventory % by Wt EINECS 233- 30 - 60 136-6 EINECS 224- 30 - 40 207-2 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane 25068-38-6 NLP 500-033- 2 - 15 5 Modified diglycidyl ether of bisphenol A 2,4,6-Tris(dimethylaminomethyl)phenol Trade Secret 90-72-2 EINECS 2
3M Thermally Conductive Adhesive TC-2810 (Part A) 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Amine compounds. Carbon monoxide.
3M Thermally Conductive Adhesive TC-2810 (Part A) 7.2. Conditions for safe storage including any incompatibilities Store away from acids. Store away from oxidising agents. 7.3. Specific end use(s) See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and personal protection recommendations. SECTION 8: Exposure controls/personal protection 8.
3M Thermally Conductive Adhesive TC-2810 (Part A) An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program.
3M Thermally Conductive Adhesive TC-2810 (Part A) 10.5 Incompatible materials Strong acids. Strong oxidising agents. 10.6 Hazardous decomposition products Substance None known. Condition Refer to section 5.2 for hazardous decomposition products during combustion.
3M Thermally Conductive Adhesive TC-2810 (Part A) 3,3'-oxybis(ethyleneoxy)bis(propylamine) 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1chloro-2,3-epoxypropane 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1chloro-2,3-epoxypropane Modified diglycidyl ether of bisphenol A Ingestion Dermal Rat Rat LD50 3,160 mg/kg LD50 > 1,600 mg/kg Ingestion Rat LD50 > 1,000 mg/kg Dermal LD50 3,000 mg/kg Modified diglycidyl ether of bisphenol A Ingestion Not available Not avail
3M Thermally Conductive Adhesive TC-2810 (Part A) chloro-2,3-epoxypropane sufficient for classification Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Species Test result Exposure Duration 2 generation 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane 4,4
3M Thermally Conductive Adhesive TC-2810 (Part A) Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information The information below may not agree with the EU material classification in Section 2 and/or the ingredient classifications in Section 3 if specific ingredient classifications are mandated by a competent authority.
3M Thermally Conductive Adhesive TC-2810 (Part A) trimethoxyocty l-, hydrolysis products with silica 4,4'Isopropylidene diphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane Boron oxide Modified diglycidyl ether of bisphenol A Boron Nitride (BN) 25068-38-6 Water flea Experimental 21 days NOEC 0.
3M Thermally Conductive Adhesive TC-2810 (Part A) oxybis(ethylen eoxy)bis(propy lamine) 4,4'25068-38-6 Isopropylidene diphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane Biodegradation test (I) Laboratory 28 days Biodegradation BOD 0 % weight OECD 301C - MITI test (I) Duration N/A Study Type N/A Test result N/A Protocol N/A N/A N/A N/A N/A 28 days Bioaccumulati <42 on factor Other methods N/A 12.
3M Thermally Conductive Adhesive TC-2810 (Part A) No information available. SECTION 13: Disposal considerations 13.1 Waste treatment methods See Section 11.1 Information on toxicological effects Dispose of completely cured (or polymerised) material in a permitted industrial waste facility. As a disposal alternative, incinerate uncured product in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes.
3M Thermally Conductive Adhesive TC-2810 (Part A) List of relevant H statements H302 H314 H315 H317 H319 H360DF H411 H412 Harmful if swallowed. Causes severe skin burns and eye damage. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May damage fertility. May damage the unborn child. Toxic to aquatic life with long lasting effects. Harmful to aquatic life with long lasting effects. List of relevant R-phrases R22 Harmful if swallowed. R34 Causes burns.
3M Thermally Conductive Adhesive TC-2810 (Part A) Section 8: Appropriate Engineering controls information information was modified. Section 8: Personal Protection - Eye information information was modified. Section 8: Personal Protection - Skin/hand information information was modified. Section 8: Personal Protection - Respiratory Information information was modified. Section 13: 13.1. Waste disposal note information was modified.
3M Thermally Conductive Adhesive TC-2810 (Part A) Section 8: ppm key information was deleted. Section 11: Aspiration Hazard Table information was deleted. Section 11: Classification disclaimer information was deleted. Section 12: Classification Warning information was deleted.
3M Thermally Conductive Adhesive TC-2810 (Part B) Safety Data Sheet Copyright, 2014, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M Thermally Conductive Adhesive TC-2810 (Part B) For full text of R phrases, see Section 16. 2.2. Label elements CLP REGULATION (EC) No 1272/2008 SIGNAL WORD WARNING! Symbols: GHS07 (Exclamation mark) |GHS09 (Environment) | Pictograms Ingredient 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro2,3-epoxypropane CAS Nbr 25068-38-6 HAZARD STATEMENTS: H319 H315 H317 Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction.
3M Thermally Conductive Adhesive TC-2810 (Part B) Response: P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive Symbol(s) Irritant Dangerous for the environment Contains: 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane Risk phrases R36/38 R43 R51/53 Irritating to eyes and skin. May cause sensitisation by skin contact. Toxic to aquatic organisms.
3M Thermally Conductive Adhesive TC-2810 (Part B) Please see section 16 for the full text of any R phrases and H statements referred to in this section Please refer to section 15 for the any applicable Notas that have been applied to the above components For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation Remove person to fresh air.
3M Thermally Conductive Adhesive TC-2810 (Part B) 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry.
3M Thermally Conductive Adhesive TC-2810 (Part B) protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended: Indirect vented goggles. Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment.
3M Thermally Conductive Adhesive TC-2810 (Part B) VOC less H2O & exempt solvents 0% SECTION 10: Stability and reactivity 10.1 Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section 10.2 Chemical stability Stable. 10.3 Possibility of hazardous reactions Hazardous polymerisation will not occur. 10.4 Conditions to avoid Heat is generated during cure.
3M Thermally Conductive Adhesive TC-2810 (Part B) Reproductive/Developmental Toxicity: Contains a chemical or chemicals which can cause birth defects or other reproductive harm. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification.
3M Thermally Conductive Adhesive TC-2810 (Part B) Reproductive and/or Developmental Effects Name Route Value Species Test result Exposure Duration 2 generation 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3epoxyp
3M Thermally Conductive Adhesive TC-2810 (Part B) No product test data available. Material 4,4'Isopropylidene diphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane Boron oxide 4,4'Isopropylidene diphenol, oligomeric reaction products with 1-chloro-2,3epoxypropane Boron oxide Boron Nitride (BN) CAS Nbr 25068-38-6 Organism Ricefish Type Experimental Exposure 96 hours Test endpoint Test result LC50 1.
3M Thermally Conductive Adhesive TC-2810 (Part B) Boron Nitride (BN) 10043-11-5 Boron oxide 1303-86-2 Data not N/A available or insufficient for classification Data not N/A available or insufficient for classification N/A N/A N/A N/A N/A N/A Test type Duration Data not N/A available or insufficient for classification Data not N/A available or insufficient for classification Study Type N/A Test result N/A Protocol N/A N/A N/A N/A Laboratory BCF - Other 28 days Bioaccumulati <42 on factor
3M Thermally Conductive Adhesive TC-2810 (Part B) disposal facilities. The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of 3M, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC - 2000/532/EC and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional regulations are complied with and always use a licensed waste contractor.
3M Thermally Conductive Adhesive TC-2810 (Part B) Revision information: Revision Changes: Section 8: Eye/face protection information information was modified. Section 16: List of relevant R phrase information information was modified. Section 3: Composition/ Information of ingredients table information was modified. Section 12: Component ecotoxicity information information was modified. Section 12: Persistence and Degradability information information was modified.
3M Thermally Conductive Adhesive TC-2810 (Part B) Label: Precautionary Statement - Header information was added. CLP: Ingredient table information was added. Section 2: 2.2 & 2.3. CLP REGULATION heading information was added. Label: CLP Ingredients table Ingredient heading information was added. Label: CLP Ingredients table CAS No heading information was added. Label: CLP Ingredients table Percent by Wt heading information was added. Section 2: H phrase reference information was added.
