User's Manual

Reader User Guide DT-018581
© 3M 2008 All rights reserved.
22
Host USB Power
Reader draws no power from host USB connector
USB connector
1 x USB A (host); 2 x USB B (peripherals)
USB cable length
2.00 m (79”)
Aux. USB power
5V DC, 500mA total (both ports combined)
RF Chip
ISO 14443-2,3,4
Table 6: Power Supply Specifications
Input voltage
100 – 240VAC +/- 10%
Line frequency
47 – 63Hz
Cable length
Power supply cable: 1.3m (52”)
AC line cord: 2.0 m (78”)
Power rating
15 watts
Table 7: Smart Card Communication Interfaces and Protocols
Protocol
T=1, T=0
Frequency
up to 12 MHz (PPS, DI parameter)
Communication speed
up to 344,105 bps (PPS, Fl parameter)
ISO Support
7816 Class A and AB smart card
Capacity
100,000 insertions
Contact
Sliding contact
8 contacts - ISO location
Table 8: Regulatory Information
Device Safety
USA UL60950, EN60950, IEC60950
EMC – emissions
USA FCC Part 15, sub-part J, Class A
Canada ICES-003
EEA EN55022 Class A
Australia AS/NZS 3548
EMC – immunity
EEA EN55024
EMC
EMC ESTI EN 301 489-1 V1.2.1 (2000-08)
EMC ESTI EN 301 489-3 V1.2.1 (2000-08)
EMC ESTI EN 300 330-1 V1.3.1 (2001-06)
EMC ESTI EN 300 330-2 V1.1.1 (2001-06)