User's Manual

Reader User Guide DT-018581

2. Clean the document window with a clean cloth. For stubborn dirt, use a mild glass

cleaner or a lightly dampened cloth (water).

Note: Do not use abrasive cleaners or solvents. These may scratch the glass or

damage the plastic.

3. Verify that there are no streaks or smudge spots remaining on the document window.

4. Clean the body of the reader with a lightly dampened cloth (water).

5. Turn on the power switch.

6. Verify that the power-up self test performs correctly.

For more information, see Power-up Self Test on page 12.