User's Manual

DT-018581 Reader User Guide

Figure 16: Test Card

4. Place the test card face down on the document window, aligned with the left guide, with

the test card instructions facing up.

Figure 17: Test Card Placement

5. Push the card to the back of the document window until it stops.

Note: Do not move the document during the scanning process.

6. Observe the LEDs during the scanning procedure.

• The READY LED turns off and the amber LED (BUSY) turns on.

• The amber LED (BUSY) remains on while the reader scans and processes the data.

• The green LED (OK) turns on, indicating a successful read.

• The READY LED turns on, indicating that the reader is ready to scan another

document.

The data from the test card is sent to the host computer and the results displayed on the PC

screen.