User's Manual

3M Confidential DRAFT Travel Document Reader User Guide

• connect the reader to the host system using the USB cable

Unpacking the Reader

Each reader package consists of:

• 1 reader

• 1 power supply converter

• 1 AC cable

• 1 test card

• 1 Documentation/Software CD

• 1 USB communication cable

• 1 Scotch-Brite™ Microfiber Cleaning Cloth

Remove the contents from the box and separate the components from the packing

material.

Verify that all the parts described have been received. If any parts are missing, contact

3M Global Technical Services (GTS).

For more information, see Appendix D: Customer Service on page 27.

Store the packaging in the event that the reader may require reshipment to 3M for

maintenance.

Note: Allow the reader to come to room temperature for a minimum two hours before

operation, if it has been stored below room temperature.

Installing the Software

You must have PC Administrative rights to install the software.

Note: Consult with your IT support representative to confirm the proper installation procedures.

Uninstalling Previous Versions

If an earlier software version is installed on host computer, this earlier version will need to be

removed.

Shut down Remote Locator by right clicking on the icon in the system tray.

Remove the program 3M Document Authenticator using the Add/Remove Programs

feature in the Control Panel.