User's Manual

6 -Upload Package via USB  34
Proprietary
PC Device Manager
4 From the Device Admin Utility, select Indicate to verify you are connecting to the correct
device. The device LEDs should flash and you should hear a sound.
5 Select Connect to connect to the device.
NOTE: If the connect button is disabled, communication between the device and the PC or
laptop is not functioning correctly. This could be for several reasons: the device is not
physically connected to the PC or laptop via USB cable, the device OTG USB mode is not set
to Normal, the MiY Device Driver is not installed on the PC or laptop or the USB port on the
device or PC/laptop is not functioning correctly.