User's Manual

3 -Installing a MiY Device  12
Proprietary
2 Place the device’s bracket hinge pin on the hooked mounting bracket
Attaching the Hinge Pin to the Mounting Bracket
3.3 Wiring Installation
Lift the compression panel so that the terminal blocks and connectors are exposed. See below
for a diagram which shows the connectors available under the compression panel.
The Ethernet port is a PoE port that can deliver both power and communication to MiY devices
and allows the devices to function without requiring additional 12V cables. If both wires are
connected to the device, the additional power source will work as a hot-swap redundant power
source. Refer to the following tables for descriptions of the pins in Terminal Blocks A, B, and C.