User's Manual

8 -Verifying Users for Access/Entry  60
Proprietary
Verification Type Screen Displayed Instructions
Card
When prompted by the device with the
top screen, place the appropriate card
on the reader located on top of the
device. This area will be indicated by
blue flashing LEDs. Do not remove the
card from the reader.
Keep the card on the reader while the
bottom screen is displayed.
Upon successful card verification, the
device will display the next screen in the
verification workflow.
Multi-Mode
Verification
When this screen is displayed, it
indicates that the device is in multi-
mode.
Presenting a card, finger, or Panel ID will
initiate a multi-step workflow for
verification.
Success
Upon successful verification, this screen
will be displayed on the device.
The device will then perform the action
programmed for a verification event
(e.g. unlock the door).