User's Manual

⎟ 33
Processing items
The Process Items tab is the same as in the basic administration interface.
See “
Processing items” on page 27.
Notifications
The SelfCheck system can automatically send email
notifications to the email addresses selected on the
Notifications tab. There are five categories of notify-
cation. Each can be enabled or disabled individually.
The email addresses set up on this page are inde-
pendent of the email addresses set up in the
Notifications section of the Support tab. Disabling a
notification here has no impact on sending notifica-
tions to the email addresses on the Support tab.
For a list of notification messages see “
Appendix A:
Email notification messages”. You can edit the text of
the email notifications in the Messages tab (page
35).
To select a notification category
1 In the Email box, type one or more email
addresses separated by semicolons.
2 Select the check box in front of the category label.
3 Click Save … Notification.
Chute full notification
Sends an email warning when the chute is nearly full
and another when it is full.
Notifications
Max Items
The maximum number of items that can fit in your chute before they need to
be removed.
Warn at
The percentage of the Max Items number at which a warning is sent.
Email
Type the email addresses where the warning and chute full emails should be
sent.
Event notifications
ILS Communications Failure/Restored
Sends an email notification anytime the circulation system communication
fails or is restored after a failure.
Items Removed
Sends an email notification any time the chute is unloaded.
System Shutdown
Sends an email notification any time the system is shut down or restarted