User's Manual

22 ⎟
Export Settings
Click Export Settings to save the current configuration for future
use on the current unit or another unit.
Import Settings
Click Import Settings to import a previously saved configuration.
Use this command to configure several SelfCheck systems alike or
to restore a previous configuration.
Manage
Click Manage to open the advanced setup pages. This command is
available only on the Home page and then only if an advanced
password has been entered.
Logout
Click Logout when you have finished making changes to the
SelfCheck system. Once you have logged out, you must log in
again if you want to make additional changes.
Shutdown
Click Shutdown to open a dialog box that enables you to shut
down or restart the SelfCheck system.
Close
Click Close to log out of SelfCheck System Manager and close the
browser. The Close command is in the upper right corner of the
screen.
Save buttons
Pages that allow settings to be changed have one or more Save
buttons. You must click the appropriate Save button to save any
changes you make. Otherwise, changes will not be implemented
when you move to another page. When there is more than one
Save button on a page, each Save button typically is placed below
the group of settings it saves.
Tabs
The primary configuration pages are tabbed for quick access. To
select a primary configuration page, click its tab. Subordinate pages
are not tabbed. To return to a primary page from a subordinate
page, click the name of the primary page in the navigation bar.