User Guide

22
WARNING ! See warnings on inside back cover.
3M
™
Supplied Air Respirators — Product Matrix
Facepieces
Adapter Kits
Dual Airline, Supplied-Air, Tight-Fitting Facepieces
6000PD Series Full
Facepiece
Note: Use alternate
facepiece kit W3337
(not shown)
7800S** 6000 Series 6000DIN Series 7000 Series 6000 Series
Full Facepiece Full Facepiece Full Facepiece Half Facepiece Half Facepiece
6000 Series Full
Facepiece (S, M, L)
AAD#: 07138; 07139;
07140
6000 Series Half
Facepiece (S, M, L)
AAD#: 07024; 07025;
07026
W-3232
W-3217
W-3229
W-3238
7890
W-3231
Back-Mounted Front-Mounted Combination Back- Combination Front-
Adapter Kits Adapter Kits Mounted Adapter Kits Mounted Adapter Kits
SA-2000 (High Pressure) SA-1000 (High Pressure) SA-2100 (High Pressure) SA-1100 (High Pressure)
SA-2000LP (Low Pressure) SA-1000LP (Low Pressure) SA-2100LP (Low Pressure) SA-1100LP (Low Pressure)
W-3237
Supplied Air Hose
Portable Air
Purification Panels
W-9435 W-2929 W-3020
3
⁄8'' High
3
⁄8'' High
1
⁄2'' Low
Pressure Hose Pressure Hose Pressure Hose
(25, 50, or 100 ft.) (25, 50, or 100 ft.) (25, 50, or 100 ft.)
256-02-00 256-02-01 W-2806 Note: W-2808
(50 cfm) with CO (100 cfm) with (50 cfm) without CO Monitor
Filtration and Monitor CO Monitor CO Monitor Retrofit Kit
#07006 Available
#37027
25 ft. #07010
50 ft. #07011
100 ft. #07012
25 ft. #07033
50 ft. #07034
100 ft. #07035
Standard Kits Combination Kits
3M
™
Supplied Air Respirators are designed to deliver clean air
to the worker. The air* can be supplied from a high pressure
compressor, low-pressure pumps, or cylinders (bottled air).
Supplied air respirators offer many advantages over traditional
respiratory protection including comfort and protection.
Features
• Cool or heat incoming air
• Fit testing on required on tight-fitting facepieces
• Low maintenance
*It is the employer’s responsibility to ensure that the compressed air
used with any supplied air system meets the requirements for at least
Grade-D breathing air per the Compressed Gas Association
Commodity Specification G-7.1-1997 in the U.S. In Canada refer to
CSA Standard Z180.1 table for the quality of compressed breathing air.
** Clip-on 3M
™
Welding Shield also available.
3M Automotive Aftermarket Division (AAD) Product Numbers are found in blue type on select products