Datasheet

3M™ SecureFit™ SF600 Series Safety Spectacles
Intended Use
These products are intended for protection against high
speed particles at low energy (F) at extreme temperature
conditions, -5°C and +55°C, (T) in accordance with
EN166:2001. They also protect against UV radiation in
accordance with EN170:2002 (clear and amber lenses), and
sun glare in accordance with EN172:1994 (grey, I/O and blue
mirror lenses). A number of lens options are available for a
variety of dierent applications:
• Clear – good colour recognition and UV protection
• Grey – protection from sun glare
• Amber – enhanced contrast in low light conditions
• Grey polarised – helps block horizontal reective glare &
reduces sun glare
• I/O mirror – may be suitable for workers subject to glare
when moving in and out of strong sunlights
• IR lenses – 1.7, 3.0 & 5.0 – certain welding, cutting & torch
work applications
• RAS – certain harsh environments
Use Limitation
• Never modify or alter this product
• Do not use this product against hazards other than those
specied in this document
• These products are not suitable for grinding or electric arc
welding
• These products are NOT designed to be worn over
prescription spectacles
• In accordance with EN166:2001 safety spectacles cannot
be tested and approved for use against liquid droplets:
where liquid protection is specied a suitable product
should be considered, for example safety goggles
Standards and Approval
This protective eyewear has been shown to meet the
basic safety requirements under Article 10 of the European
Community Directive 89/686/EEC and is thus CE marked.
These products have been examined at the design stage by
INSPEC International Ltd., 56 Leslie Hough Way, Salford,
Greater Manchester, M6 6AJ United Kingdom, (Notied
Body number 0194).
These products are tested and CE approved against
EN166:2001.
Material Listing Spectacles:
Marking
The products have demonstrated compliance with the
requirements of EN 166:2001 and associated standards and
bear the following marks:
Explanation of Marking
Frame Marking

Component Material
Lens Polycarbonate
Temple Arm Polycarbonate
Temple inlay
Polycarbonate / polyester
blend
Temple Pin Stainless Steel
Foam Insert:
Brow Nylon 6/6/TPU
Foam Insert
Thermoformed closed cell
foam
Clear lens 2C-1.2 3M 1 FT KN
Grey lens 5-3.1 3M 1 FT KN
Amber lens 2C-1.2 3M 1 FT KN
Grey Polarised lens 5-3.1 3M 1 FT
I/O lens 5-1.7 3M 1 FT
IR1.7 lens 1.7 3M 1 F
IR3.0 lens 3 3M 1 F
IR5.0 lens 5 3M 1 F
Marking Description
2C-1.2 (EN 170:2002)
UV protection with good
colour recognition. This
product conforms to the
requirements of the standard,
providing UV protection for
the complete specied range
(210nm – 365nm).
5-1.7 and 5-3.1(EN 172:1994(as
amended))
Sun-glare protection
conforming to the
requirements of the standard,
providing UV protection for
the complete specied range
(280nm – 350nm).
1.7, 3.0 & 5.0 (EN 169:2002
Welding lens providing
protection against UV for the
specied range (210nm to
365nm) and IR protection for
the specied range (780nm to
2000nm).
1 Optical Class
F
Impact protection against high
speed particle at low energy
(45m/s)
T
Tested for impact protection
at extreme temperature
conditions -5°C and +55°C
K
Resistance to surface damage
by ne particles
N Resistance to fogging
All variants SF600 Series 3M EN166 FT CE