Datasheet

3M
™
SecureFit
™
SF500 Series Safety Glasses
Please recycle. Printed in the UK. © 3M 2020. 3M, Scotchgard
and SecureFit are trademarks of 3M Company. All rights reserved.
OMG132915
IMPORTANT NOTICE
The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent
professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application.
All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products
orenvironment. Any action or usage of this product made in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional
guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be
observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain
external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty
orcompensation.
For more information on 3M products and services please contact 3M.
Personal Safety Division
3M United Kingdom PLC
3M Centre, Cain Road
Bracknell, Berkshire RG12 8HT
Tel.: [phone]
www.3M.eu/Safety
3M Ireland Limited
The Iveagh Building
Carrickmines Park
Carrickmines
Dublin 18
t: 1 800 320 500
Marking
The products have demonstrated compliance with the requirements of EN 166:2001 and associated standards and bear the following marks:
Product ref
(short ID)
Lens marking Frame marking
SF501SGAF-BLK 2C-1.2 3M 1 FT KN 3M EN 166 FT
SF501SGAF-GRN 2C-1.2 3M 1 FT KN 3M EN 166 FT
SF501SGAF-RED 2C-1.2 3M 1 FT KN 3M EN 166 FT
SF502SGAF-BLK 5-3.1 3M 1 FT K N 3M EN 166 FT
SF503SGAF-BLK SGAF 2C-1.2 3M 1 FT K N 3M EN 166 FT
SF505SGAF-DGR 5-2.5 3M 1 FT K N 3M EN 166 FT
SF507SGAF-BLK 5-1.7 3M 1 FT K N 3M EN 166 FT
SF528SGAF-DGR 5-1.4 3M 1 FT K N 3M EN 166 FT
SF501AF-BLK 2C-1.2 3M 1 FT 3M EN166 FT
SF509AF-BLK 5-3.1 3M 1 FT 3M EN166 FT
SF501ASP-BLK 2C-1.2 3M 1 FT K 3M EN166 FT
SF517ASP-GRN 1.7 3M 1 FT K 3M EN166 FT
SF530ASP-GRN 3 3M 1 FT K 3M EN166 FT
SF550ASP-GRN 5 3M 1 FT K 3M EN166 FT
Explanation of marking
Marking Description
2C-1.2
(EN 170:2002)
UV protection with good colour recognition. This product conforms to the requirements of the standard,
providing UV protection for the complete specified range (210nm – 365nm)
5-1.7, 5-2.5 and 5-3.1
(EN 172:1994 (as amended))
Sun-glare protection conforming to the requirements of the standard, providing UV protection for the
complete specified range (280nm – 350nm)
1 Optical class
F Impact protection against high speed particle at low energy (45m/s)
T Tested for impact protection at extreme temperature conditions -5°C and +55°C
K Resistance to surface damage by fine particles
N Resistance to fogging