3MTM Water Filtration Products Scale Feeder Manifold Water Filtration System Instruction Manual For SF1XX High Flow Series Water Filtration Systems Installer: Please leave this manual with owner/operator.
3M™ Water Filtration Products Table of Contents Safety Information........................................................................................................................................2 Warning Statements.....................................................................................................................................2 Caution/Important Notes...............................................................................................................................
CAUTION To reduce the risk associated with property damage due to water leakage: • Read and follow Use Instructions before installation and use of this system. • Installation and Use MUST comply with all state and local plumbing codes. • Protect from freezing, remove filter cartridge when temperatures are expected to drop below 40°F (4.4°C); • Do not install on hot water supply lines. The maximum operating water temperature of this filter system is 100°F (37.8°C).
Product Dimensions 17 5/16" (44.0 cm) 5 7/16" (13.8 cm) 18 1/16" (45.9 cm) Minimum of 3" (7.6 cm) For Cartridge Change How to Use the Inlet/Outlet Fitting Retention Clips This product is outfitted with inlet/outlet fittings. The fittings can be attached or removed from the system without tools. Retention clips are semi-circular in shape with three internal tabs, bottom, center and top. Tab interlaces with windows in the manifold head near each connection port.
Equipment Installation CAUTION To reduce the risk associated with property damage due to water leakage: • Do not use a torch or other high temperature sources near filter system, cartridges, plastic fittings or plastic plumbing. • On plastic fittings, never use pipe sealant or pipe dope. Use PTFE thread tape only, pipe dope properties may deteriorate plastic. • Take care when using pliers or pipe wrenches to tighten plastic fittings, as damage may occur if overtightening occurs.
Equipment Start-up Procedure 1. Turn on incoming water to system. 2. Pressurize system by rotating the inlet ball valve handle 1/4 turn counter-clockwise to the “ON” position. 3. Check for leaks. 4. Use any downstream vent to remove trapped air. 5. Flush system in accordance with the Performance Data Sheet for the water filter cartridge. System is now ready to use.
Replacement Parts Listing Item Part no.
Limited Warranty 3M Purification Inc. warrants SF1XX only to be free from defects in material and workmanship for five (5) years from the date of purchase. The disposable filter cartridge is warranted from defects in material and workmanship for a period of one (1) year from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alterations or damage not caused by 3M Purification Inc. or failure to follow installation and use instructions.
