MSDS

ManualsBrands3M ManualsChemicals & Cleaning SuppliesScotchrap ™ Black Pipe Primer, Quick Drying - 1 Gallon Can

3M General Offices

3M Center

St. Paul, MN 55144-1000

1-800-364-3577 or (651) 737-6501 (24 hours)

9/23/2011 10:29:36 AM

Material Safety Data Sheet

Purchase Order #: 2602744

Customer Number: RTB2785

INC BLDG B

PLATT ELECTRIC SUPPLY

10605 SW ALLEN BLV

BEAVERTON, OR 97005-4896

United States of America

Dear INC BLDG B

Enclosed is the Material Safety Data Sheet (MSDS) for the product that your company recently purchased from 3M

Please forward the attached MSDS to the individual in your organization responsible for implementing these

regulations.

If you are a distributor and resell this product, OSHA and EPA require that you transmit this MSDS information to

your customers at the time of first shipment or whenever you receive revised MSDSs from 3M.

3M MSDSs are available over the Internet at www.3m.com/MSDSSearch. You may also order a CD-ROM of 3M

MSDSs by calling 1-800-364-3577.

3M is committed to meeting our customer requirements. Please contact your 3M customer service or sales

representative if you have any questions. If you do not know whom to contact, please call the 3M Product

Information Center at 1-800-364-3577.

If you are not currently receiving 3M MSDSs by e-mail and would like to do so, please

contact our eMSDS Administrator at emsdsadmin@mmm.com or by calling 651-736-5875.

Summary of content (11 pages)

PAGE 1
3M General Offices 3M Center St.
PAGE 2
PAGE 3
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 4
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 General Physical Form: Liquid Immediate health, physical, and environmental hazards: Flammable liquid and vapor. Closed containers exposed to heat from fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back. Contains a chemical or chemicals which can cause cancer. May cause target organ effects.
PAGE 5
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Wash affected area with soap and water. If signs/symptoms develop, get medical attention. Inhalation: Remove person to fresh air.
PAGE 6
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 Clean-up methods Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill. Contain spill. Cover spill area with a fire-extinguishing foam. An aqueous film forming foam (AFFF) is recommended.
PAGE 7
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 8.
PAGE 8
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 Specific Gravity pH Melting point 0.83 [Details: MITS data] Not Applicable No Data Available Evaporation rate Volatile Organic Compounds Kow - Oct/Water partition coef VOC Less H2O & Exempt Solvents Viscosity Conditions to avoid No Data Available No Data Available No Data Available 478 g/l [Test Method: South Cost Air Qual Mgmt Dist] 300 centipoise [@ 73.
PAGE 9
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 Waste Disposal Method: Incinerate in a permitted hazardous waste incinerator. As a disposal alternative, dispose of waste product in a permitted hazardous waste facility. EPA Hazardous Waste Number (RCRA): D001 (Ignitable) Since regulations vary, consult applicable regulations or authorities before disposal. SECTION 14:TRANSPORT INFORMATION ID Number(s): 80-6109-2573-9 For Transport Information, please visit http://3M.
PAGE 10
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 The components of this product are in compliance with notification requirements in the Philippines. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
PAGE 11
MATERIAL SAFETY DATA SHEET SCOTCHRAP BRAND PIPE PRIMER 08/09/11 Copyright was deleted. Section 16: Web address heading was deleted. Section 6: Release measures heading was deleted. Section 1: Address line 1 was deleted. Section 1: Address line 2 was deleted. DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued.