Cut Sheet

All statements, technical information, and recommendations related
to Seller’s products are based on information believed to be
reliable, but the accuracy or completeness thereof is not
guaranteed. Before utilizing the product, the user should determine
the suitability of the product for its intended use. The user assumes
all risks and liability whatsoever in connection with such use.
Any statements or recommendations of the Seller which are not
contained in the Seller’s current publications shall have no force or
effect unless contained in an agreement signed by an authorized
officer of Seller. The statements contained herein are made in lieu
of all warranties, expressed or implied, including but not limited to
the implied warranties of merchantability and fitness for a particular
purpose which warranties are hereby expressly disclaimed.
SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER
PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT
LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY
INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES
SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF
THE SELLER’S PRODUCTS THAT WERE DEFECTIVE.
Important Notice
3
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/426 8688
FAX [phone]
Litho in USA.
© 3M 1996 80-6108-5341-0
40% Pre-consumer waste paper
10% Post-consumer waste paper
While the chart gives coverage data for most common sizes,
the following formula may be helpful for non-standard
items:
Squares of Tape = π (LP) (DP) TW
1200 (TW-OV)
Where π = 3.14
LP = length of pipe (ft.)
DP = outside diameter of pipe (in.)
TW = tape width (in.)
OV = overlap of tape (in.)
When using metrics,
squares of tape = π (LP) (DP) TW
9290 (TW-OV)
Metric Conversions
1 inch = 25,4 millimeters
1 foot = 0,3048 meter
1 sq. ft. = 0,092 sq. meter
1 gallon = 3,785 liters
Primer Coverage
1 gallon of Scotchrap Pipe Primer will cover up to 700 sq.
ft. depending on the surface condition of the pipe. to
calculate area of pipe for primer coverage:
Sq. ft. of pipe = π (DP ÷ 12) (LP)
Shelf Life
Scotchrap™ Pipe Primer, Scotchfil
™
Electrical Insulation
Putty and Scotchrap Tapes have a 5 year shelf life (from
date of manufacturer) when stored under the following
recommended storage conditions. Store behind present
stock in a clean dry place at a temperature of 21°C (70°F)
and 40 to 50% relative humidity. Good stock rotation is
recommended. Scotchrap 50 and 51 are available in the
following standard roll sizes:
1 in. (25,4 mm) x 100 ft. (30,5 meters)
2 in. (50,8 mm) x 100 ft. (30,5 meters)
4 in. (101,6 mm) x 100 ft. (30,5 meters)
6 in. (152,4 mm) x 100 ft. (30,5 meters)
Other lengths and widths available upon request.