Data Sheet

Page 2 of 2
Scotch
TM
2228 Rubber Mastic Tape
Data Sheet
__________________________________________________________________________________
_________________________________________________________________________________________
3M UK PLC 3M Ireland 3M UK PLC
Electrical Products Sales Office Sales Office
3M House, PO Box 1 3M House, Adelphi Centre PO Box 393
Bracknell, Berkshire RG12 1JU Dun Laoghaire, Co Dublin, Ireland Bedford MK41 0YE
Telephone: [phone] Telephone: [phone] Telephone: [phone]
Fax: [phone] Fax: [phone] Fax: [phone]
3M Water Seal Test
Samples were constructed using 2228 tape as a seal
between PVC cable jackets and connecting ground wires
(3M Cable Grounding Kit 2252). The specimens were
thermal cycled in water baths at 25°C and 90°C. The
total test time of 336 hours revealed no significant
change in insulation resistance. The results exceed
requirements listed in UL486D “Standard for Insulated
Wire Connectors for Use With Underground
Connectors” for insulation resistance (6.0 megohms,
section 7.1) and dielectric voltage withstand (2.2kV, 1
minute, section 8.1)
Specification
The tape shall be 1.65mm thick. The tape must be
ethylene propylene rubber based and coated with a
rubber mastic pressure sensitive adhesive. The tape must
be classified for normal service temperatures up to 90°C
with allowable short-term exposure up to 130°C.
The tape must be applicable at temperatures of 0°C to
38°C without loss of physical properties. The tape must
be classified for use in both indoor and weather exposed
outdoor environments.
The tape must not split or crack when exposed to normal
operating temperatures and environments. The tape
must be compatible with synthetic cable wire insulations.
The tape shall not be corrosive to aluminium or copper
conductors.
Installation
Scotch 2228 should be applied in half-lapped layers until
desired insulation build up is reached. Stretch the tape
to ¾ of its original width during application for good
conformability and to obtain a moisture tight seal.
Scotch 2228 should be overwrapped for mechanical
protection with two half-lapped layers of Scotch Brand
vinyl electrical tape.
Shelf Life
Scotch 2228 tape has a five year shelf life (from date of
manufacture) when stored under the following
recommended storage conditions. Store behind present
stock in a clean, dry place at a temperature of 70°F
(21°C) and 40-50% relative humidity. Good stock
rotation is recommended.
Availability
Scotch 2228 Rubber Splicing Tape is available from your
local 3M authorised distributor.
Important Notice
Technical information provided by 3M is based on experience and/or tests believed to be reliable, but their accuracy is not guaranteed and the results may not be relevant to every
user’s application. For this reason 3M does not accept responsibility or liability, direct or consequential, arising from reliance upon any information provided and the user should
determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M’s liability for death or personal injury arising
from its negligence. All questions of liability relating to 3M products are governed by the seller’s terms of sale subject where applicable to the prevailing law. If any goods
supplied or processed by or on behalf of 3M prove on inspection to be defective in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer the
price paid for the goods or services. Except as set our above, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent
permissible at law.
3M and Scotch are trademarks of the 3M Company. Printed in the UK.
© 3M United Kingdom PLC, 2001.