User Guide

Delivery Impact Peel Shear Tensile Bonding
Time (sec) Ball & Ring Heat Resistance Strength Strength Strength Range
Viscosity for 1'' x 3'' Soft Point
(3)
Resistance (in.-lbs.) PIW
(4)
PSI
(5)
PSI Elongation 1/8'' Bead
CPS
(2)
Cartridge** (°F/°C) (°F/°C) 72°F (22°C) 72°F (22°C) 72°F (22°C) 72°F (22°C) % (sec)
(6)
13,000 N/A 157/70 120/49 14 13 500 380 400 120
@250°F
4000 45 205/96 130/54 13 6 480 600 300 25
@250°F
8250 47 184/84 140/60 13 9 600 270 600 40
@250°F
10,500 57 178/81 140/60 62 13 350 547 125 40
@250°F
9500 N/A 191/88 120/49 N/A N/A N/A 62 250 30
@250°F
12,000
@375°F N/A 315/157 265/130 N/A 22 490 N/A N/A 30
2875 35 186/86 130/54 36 13 375 360 1000 50
@375°F
4100 45 220/104 145/63 25 20 430 750 1300 45
@375°F
5000 65 292/144 175/79 24 18 250 375 1100 45
@375°F
5500 65 305/152 175/79 50 15 275 200 1850 30
@375°F
1900 30-40 200/93 125/52 N/A 6 500 N/A N/A N/A
@375°F
4800 35-45 178/81 135/57 40 12 250 N/A N/A N/A
@375°F
1870 30 201/94 130/54 20 7 545 450 400 35
@375°F
6000 55 190/88 140/60 58 14 390 650 625 40
@375°F
7000 75 325/163 300/149 22 18 700 2100 300 25
@375°F
5200 70 270/132 220/104 40 16 570 520 600 50
@375°F
5000 45 179/81 140/60 42 13 250 400 750 50
@375°F
23,000 120 240/116 200/93 29 29 550 363 930 40
@375°F
2650 55 304/151 170/77 19 10 350 283 98 30
@375°F
15,000 N/A 224/107 120/49 N/A 16 N/A N/A N/A > 60
@325°F
* Also available in bulk. ** Time to deliver the third consecutive cartridge through PG II or PG II LT @ 80 PSI. N/A = Not available
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.