User Guide

Selecting a 3M
™
Scotch-Weld
™
Hot-Melt Applicator to fit your needs
3M
™
Scotch-Weld
™
Hot Melt Applicator LT
3M
™
Scotch-Weld
™
Hot Melt Applicator TC
3M
™
Scotch-Weld
™
Hot Melt Applicator TC with
Quadrack
™
Converter
3M
™
Scotch-Weld
™
Hot Melt Applicator AE II
3M
™
Scotch-Weld
™
Hot Melt Applicator EC
3M
™
Scotch-Weld
™
Hot Melt Applicator PG II LT
with Speedloader
3M
™
Scotch-Weld
™
Hot Melt Applicator PG II
with Speedloader
A
G
B
C
H
D
E
F
3M
™
Scotch-Weld
™
Hot Melt Applicator LT with
Quadrack
™
Converter
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
Adhesive
3M
™
Scotch-Weld
™
Weight
(1)
Output
(2)
Temperature
(3)
Type Size Accessories Available
(4)
Features
Hot Melt Applicator lb/hr dia. x length, (see keyed photos on back)
inches
3M
™
Scotch-Weld
™
10.0 oz. 2.6 265°F (129°C) LM TC 5/8 x 2 Tips ➀
(4)
, Benchstand ➅, For use with
Hot Melt Applicator LT Quadrack
™
Converter ➁, low melt adhesives
Palm Trigger➂
3M
™
Scotch-Weld
™
13.8 oz. 2.6 265°F (129°C) LM Q 5/8 x 8 Tips ➀, Benchstand ➅
Hot Melt Applicator LT
with Quadrack
™
Converter
3M
™
Scotch-Weld
™
10.0 oz. 3.5 385°F (196°C) TC 5/8 x 2 Tips ➀, Benchstand ➅, Easy to use with
Hot Melt Applicator TC Quadrack
™
Converter ➁, standard melt
Palm Trigger➂ adhesives
3M
™
Scotch-Weld
™
13.8 oz. 3.5 385°F (196°C) Q 5/8 x 8 Tips ➀, Benchstand ➅
Hot Melt Applicator TC
with Quadrack
™
Converter
3M
™
Scotch-Weld
™
20.0 oz. 4.0 400°F (204°C) AE 1/2 x 12 Includes stand All electric operation
Hot Melt Applicator
AE II
3M
™
Scotch-Weld
™
24.0 oz. 5.5 260°F-450°F Q and 5/8 x 8 Tips ➀, Benchstand ➅ Temperature modules to
Hot Melt Applicator EC (127°-232°C) LMQ operate with standard
and low melt adhesives
3M
™
Scotch-Weld
™
4.3 lbs. 6.0 265°F (129°C) LM PG 1 x 3 Tips ➀, Magazine Feeder ➆, Pneumatic high output
Hot Melt Applicator Heavy-Duty Benchstand ➄, for low melt adhesives
PG II LT with Speedloader Benchmount ➇, Foot Pedal ➃
3M
™
Scotch-Weld
™
4.3 lbs. 7.5 385°F (196°C) PG 1 x 3 Tips ➀, Magazine Feeder ➆, For standard melt
Hot Melt Applicator
Heavy-Duty Benchstand ➄, adhesives
PG II with Speedloader
Benchmount ➇, Foot Pedal ➃
These lightweight, easy-to-use units use 3M’s innovative melt-on-demand or progressive feed technology.
Product Information: 3M
™
Scotch-Weld
™
Hot Melt Applicators
(1) Weight shown is for applicator only — does not include adhesive capacity. (2) Adhesive output will vary with conditions and the adhesive used. Values are approximate and are based on maximum steady-state flow.
(3) Temperatures shown are nominal control values. Actual temperature will range slightly above and below this value. (4) Accessory tips used will depend on applicator selected and adhesive used.
A
G
B
C
H
D
E
F
Standard melt adhesives dispense at 385°F (196°C). Low melt adhesives
dispense at 265°F (129°C) and are for use only in low melt applications.
10
11
12
13
14
15 16 17