S15i Multimedia Projector Product Safety Guide S15i Projecteur multimedia - Guide de Sécurité de Produit S15i Multimedia-Projektor - Sicherheitsanleitung des Geräts S15i Proyector de Multimedia - Guiá de Seguridad del Producto S15i Proiettore Multimediale - Guida di Sicurezza del Prodotto S15i Multimedia Projector - Veiligheidsgids op Product S15i Projector dos Multimedia - Guia da Segurança de Produto S15i Multimedia-Projector- Bruksanvisning för Produktsäkerhets S15i ܠ༹ཨᆖऐ!.
3M™ Multimedia Projector S15i Product Safety Guide © 3M 2006
ENGLISH Table of Contents ENGLISH Safety Information ........................................................................................................................................5 Product Safety Labels ...................................................................................................................................9 Lamp ...........................................................................................................................................................
ENGLISH 4 3M™ Multimedia Projector S15i Product Safety Guide © 3M 2006
ENGLISH Safety Information Read, understand, and follow all safety information contained in the “Product Safety Guide” and in the “Operator’s Guide” prior to using the S15i Multimedia Projector. Service personnel must also read and understand the safety information contained in the “Service Manual”. Retain these instructions for future reference.
ENGLISH WARNING • To reduce the risk associated with choking: - Keep the battery and battery holder away from children and pets. • To reduce the risk associated with exposure to hazardous voltage: - Disconnect power cord when the projector is not in use, during lamp replacement, and while cleaning. 'R QRW UHPRYH DQ\ VFUHZV RWKHU WKDQ WKRVH VSHFL¿HG LQ WKH ODPS UHSODFHPHQW instructions. - Do not store or operate this projector in wet environments. - Do not modify this projector.
ENGLISH CAUTION • • • • To reduce the risk associated with explosion, and/or chemicals from a leaking battery: - Use only with battery type AA or equivalent. - Orient the battery's plus (+) and minus (-) terminals of the batteries according to the markings found on the remote control. - Do not leave the battery in the remote for an extended period of time.
ENGLISH Important Note 1. Always open the lens shutter or remove lens cap when the projection lamp is on. 2. To avoid premature lamp failure, do not change the mounting position of the projector (desktop ceiling mount or ceiling desktop mount) and continue to use the same lamp. 7R DYRLG UHGXFHG ODPS OLIH GR QRW WRXFK SURMHFWLRQ ODPS ZLWK EDUH ¿QJHUV 4. To avoid reduced image quality, do not touch projection lens or other internal optical components. 5.
© 3M 2006 3M™ Multimedia Projector S15i Product Safety Guide ENGLISH Product Safety Labels 9
ENGLISH Lamp Lamp Operation: The following symptoms may indicate a lamp in need of replacement: • LAMP indicator lights up red. WARNING • To reduce the risk associated with environmental contamination due to mercury in the projection lamp: - Dispose of lamp cartridge in accordance with applicable federal, state and local regulations. - The lamp in this product contains mercuy. Dispose of projection lamp in a manner that is consistent with your local hazardous waste regulations for mercury.
ENGLISH Replacing Lamp The glass lamp used in this projector contains small amounts of mercury and operates at high pressure and at high temperature and may unexpectedly shatter. Each lamp has a different lifetime and can fail in different ways, including a rupture with a loud bang or simply burn out. In the event of a lamp rupture, be sure to follow the instructions.
ENGLISH ¥ Note For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass. Also, do not install an old or previously used lamp. 1. Remove lamp access door: Please loosen the screw (marked by arrow) (1). Then, unhook the claws of the lamp door (2), and remove the lamp door (3). 2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (4) ¥ Note All lamp module screws must be loosened.
LIMITED WARRANTY This product will be free from defects in material and manufacture for a period of three (3) years from the date of purchase, subject to the following limitations.
Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be eliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
