Datasheet

Intended use (continued)
The 3M
™
Solus
™
1000 lenses are also intended to give an
enhanced level of protection against fogging and scratching
from the Scotchgard
™
coating which meets K rating for
anti-scratch (AS) and N rating for anti-fog (AF) as per
EN 166:2001.
Sterilisation by autoclaving - limited internal testing has
been carried out on samples subjected to 10x, 20x, 30x and
40x automatic cleaning and disinfection and sterilisation
by autoclaving at 121°C. Testing was then carried out on the
following properties:
Ŕ Mechanical performance (BT)
Ŕ Anti-fog properties (N)
Ŕ Anti-scratch properties (K)
Ŕ Optical performance
Based on the internal testing the claims remain valid.
NOTE: Sterilisation by autoclaving was only tested
on the safety spectacles (3M
™
Solus 1101SGAF-EU and
3M
™
Solus 1201SGAF-EU). Testing was NOT carried out
on the foam insert or headband.
A number of lens options are available for a variety of
different applications:
Ŕ Clear - Good colour recognition and excellent
UV protection
Ŕ Grey - Protection from sunglare
Ŕ Amber - Enhanced contrast in low light conditions
Ŕ Indoor / Outdoor - Perfect for workers that move in and
out of strong sunlight
Ŕ Scotchgard
™
– for added protection against fogging and
scratching (EN 166 anti-fog (N) and anti-scratch (K))
Use limitation
Ŕ Never modify or alter this product
Ŕ Do not use this product against hazards other than those
specified in this document
Ŕ These products are not suitable for grinding or welding
Ŕ These products are NOT designed to be worn over
prescription spectacles
Standards and approval
These products are type examined by SATRA Technology
Europe Ltd, Bracetown Business Park, Clonee, Dublin 15,
Dublin, Ireland. Notified Body No. 2777.
3M
™
Solus
™
1000 Series Safety Spectacles
These products are CE marked to the requirements of the
European Regulation (EU) 2016/425.
[GB only]: These products are type examined by SATRA
Technology Centre Limited, Wyndham Way, Telford Way,
Kettering,Northamptonshire, NN16 8SD, United Kingdom.
Approved Body No. 0321.
These products are UKCA marked and meet the requirements
of Regulation 2016/425 on personal protective equipment,
as amended to apply in GB.
The applicable legislation can be determined by reviewing
the Certificate and Declaration of Conformity at
www.3M.com/Eye/certs.
Materials listing
Component Material
Lens Polycarbonate
Frame (rigid) Polycarbonate
Frame (soft) TPE
Nosepiece TPR
Headband Nylon fibre or neoprene
Headband connector Polycarbonate
Gasket frame Nylon
Gasket EVA foam or TPE
RX insert Polycarbonate / polyester blend
Marking
The products have demonstrated compliance with the
requirements of EN 166:2001 and associated standards
and bear the following marks:
Product lens Lens marking Frame marking
S1101SGAF-EU 2C-1.2 3M 1 BT K N EN 166 FT CE
S1201GAF-EU 2C-1.2 3M 1 BT K N EN 166 FT CE
S1103SGAF-EU 2C-1.2 3M 1 BT K N EN 166 FT CE
S1203SGAF-EU 2C-1.2 3M 1 BT K N EN 166 FT CE
S1102SGAF-EU 2C-3 / 5-3.1 3M 1 BT K N EN 166 FT CE
S1202SGAF-EU 2C-3 / 5-3.1 3M 1 BT K N EN 166 FT CE
S1107SGAF-EU 5-1.7 3M 1 BT K N EN 166 FT CE
S1207SGAF-EU 5-1.7 3M 1 BT K N EN 166 FT CE
S1000
Foam gasket
- EN 166 BT CE
S1000
TPE Gasket
-
EN 166 BT 3
4 CE
Explanation of marking
Marking Description
2C-1.2 (EN 170:2002)
UV protection with good colour recognition. This product conforms to the requirements of the
standard, providing UV protection for the complete specified range (210nm – 365nm)
5-1.7 and 5-3.1 (EN 172:1994
(as amended))
Sun-glare protection conforming to the requirements of the standard, providing UV protection
for the complete specified range (280nm – 350nm)
1 Optical class
F Impact protection against high speed particle at low energy (45m/s)
B Impact protection against high speed particle at medium energy (120m/s)
T Tested for impact protection at extreme temperature conditions -5°C and +55°C
K Resistance to surface damage by fine particles
N Resistance to fogging
3 Protection against droplets and splashes of liquid
4 Protection against large dust particles