User's Instructions

Regulatory

FCC ID: DGFPSDHUB1CX

IC: 458A-PSDHUB1CX

FCC/ISED Compliance

This device complies with Part 15 of the FCC Rules and with ISED’s license-exempt RSS's. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired

operation.

The following is required for Innovation, Science, and Economic Development Canada.

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le

fonctionnement.

CAN ICES-3 (A)/NMB-3(A)

WARNING: Operation of this equipment in a residential environment could cause radio

interference.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at the user’s own

expense.

Modifications to this device shall not be made without the written consent of 3M Company.

Unauthorized modifications may void the authority granted under Federal Communication Rules

permitting the operation of this device

Marking Description

This symbol is a mark depicting the ”Conformité Européenne” which literally means

”European Conformity.” This mark is a manufacturer’s declaration that the product

complies with the essential requirements of the relevant European health, safety, and

environmental protection legislation.

This product has been tested and certified as conforming to UL Standard 62368-1

and is certified to CSA Standard C22.2 # 62368

This product has been tested and certified as a Recognized Component for use as a

component with approved 3M Products to UL 2054.