Instruction Manual

5
;
Before using this equipment, record the product identication information from the ID label in the ‘Inspection and
Maintenance Log’ at the back of this manual.
DESCRIPTION:
Your Fall Protection Device is equipped with the 3M™ DBI-SALA
®
Comfort Grip Connected (CGC) Hook (Figure 1). The CGC Hooks
incorporate electronic functionality that provides condition and usage status previously not available in traditional hooks. The
CGC Hook utilizes software and electronics to provide users and on-site safety professionals with feedback during and after use
of the device.
Figure 2 illustrates key components of the CGC Hook. Red and Blue LEDs, powered by an onboard Battery (A), blink visual status
of the CGC Hook on a Multi-Directional Display (B). Wireless connectivity enables communication of status and usage data to the
3M Connected Equipment app on a Bluetooth mobile device.
Table 1 – Specications
Component Specications:
See Figure 1
Hook Description Material
A
Gate Opening
B
Minimum Breaking Strength
C
Gate Strength
D
Transverse Strength
2000217 CGC Hook Aluminum Alloy,
Alloy Steel
2.25 in
(5.72 cm)
5,000 lbs
(22.2 kN)
3,600 lbs
(16 kN)
3,600 lbs
(16 kN)
See Figure 2 Component Description
A
Battery 9V; alkaline or non-rechargeable lithium
B
Multi-Directional Display LED Indicator Lights
Mobile Device Bluetooth-enabled Android Mobile Device with the 3M Connected Equipment mobile app
Performance Specications:
Operating Temperature -40° F to 130° F (-40° C to 54° C)
Operating Temperature for Visual Alerts and Bluetooth Connectivity
(CGC Hook Operable to -40° F (-40° C))
0° F to 130° F (-29° C to 54° C)
(Low Temperature Limit Due to Battery
Temperature Specication)
Storage Temperature -40° F to 130° F (-40° C to 54° C)
Humidity Relative Humidity 5% to 95% Non-Condensing