3 Super Close Projection System SCP725 Operator’s Guide April 2012 • 78-6971-1572-9 • Copyright © 2011, 3M Company. All Rights Reserved.
M™ Super Close Projection System SCP725 Operator’s Guide Contents Introduction Safety Information Intended Use...................................................................................................................................................9 Safety Labels................................................................................................................................................12 Contents of Shipping Box Keep Your Packing Materials....................................
Operator’s Guide 3M™ Super Close Projection System SCP725 Menu Navigation ENGLISH Main Menu....................................................................................................................................................22 Input Menu....................................................................................................................................................23 Picture Menu.............................................................................................
3M™ Super Close Projection System SCP725 Operator’s Guide Introduction Thank You for Choosing 3M Equipment ENGLISH This product has been produced in accordance with 3M’s quality and safety standards to provide smooth and trouble free use in the years to come. For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your classroom, meetings, presentations, and training sessions.
Operator’s Guide 3M™ Super Close Projection System SCP725 ENGLISH original 3M Product’s warranty period as stated above. For warranty service, you must provide proof of the date of the original purchase else the manufacturing code date will be used to establish the start date of the warranty. The following are exclusions to the above listed warranty: a.
3M™ Super Close Projection System SCP725 Operator’s Guide What 3M Will Do To Correct Problems: • If your 3M Product requires service, 3M will ask you to bring or send the 3M Product, securely packaged in its original container or equivalent, along with proof of the date of original purchase, to your 3M Service Dealer or 3M Service Center. ENGLISH • 3M will, at its option, repair or replace the defective unit without charge for parts or labor. Return of the 3M Product will be at 3M’s expense.
Operator’s Guide 3M™ Super Close Projection System SCP725 CE STATEMENT Electromagnetic Compatibility Statement: Meets 2004/108/EC Directive ENGLISH Low Voltage Directive: Meets 2006-95-EC Directive. WEEE STATEMENT: The following information is only for EU-members States: The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
Operator’s Guide 3M™ Super Close Projection System SCP725 Safety Information ENGLISH Please read, understand, and follow all safety information contained in these instructions prior to the use of this projector. Retain these instructions for future reference. Intended Use Before operating the machine, please read the entire manual thoroughly. This product was designed, built and tested for use indoors, using 3M lamps and hardware.
Operator’s Guide 3M™ Super Close Projection System SCP725 ENGLISH m WARNING To reduce the risk associated with hazardous voltage: • Do not operate this projector in wet environments or outdoors. • Do not modify this projector or power cord. • Do not remove any screws other than those specified in the lamp replacement instructions. • Do not attempt to service the projector other than the lamp cartridge. There are no user serviceable parts inside the projector.
Operator’s Guide 3M™ Super Close Projection System SCP725 m CAUTION ENGLISH To reduce the risk associated with eye strain, nausea, dizziness, headache: • Take a break every hour for 15 minutes. • Do not view 3D images or 3D full motion videos while standing or walking. • Only use 3D Active Glasses for viewing field sequential 3D projected images. • View 3D image from at least 2 m (7 feet) or greater distance.
Operator’s Guide 3M™ Super Close Projection System SCP725 Safety Labels ENGLISH The following safety labels are used on this product. 12 © 3M 2011. All Rights Reserved.
Operator’s Guide 3M™ Super Close Projection System SCP725 Contents of Shipping Box ENGLISH This projector is shipped with the necessary cables required for standard DVD player, PC or laptop computer connections. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. The shipping carton contains the following items illustrated below. If any of these items are missing, please contact your place of purchase. 1.
Operator’s Guide 3M™ Super Close Projection System SCP725 ENGLISH Product Description The 3M SCP725 integrates short-arc lamp and Digital Light Processing™ (DLP) technology. It accepts input from computer and/or video sources and projects a bright image through 3M™ Vikuiti™ Super Close Projection technology.
Operator’s Guide 3M™ Super Close Projection System SCP725 Projector Distance from Screen and Image Size Refer to the chart below for the projector-to-screen distance and corresponding projected image size values.
Operator’s Guide 3M™ Super Close Projection System SCP725 Parts Identification 1. Super Close Projection Lens ENGLISH 2. Focus Adjustment 3. Lens-shift 2 4. Remote Control IR Sensor 4 3 6 5 7 5. Status Indicator Light 6. Standby/On Button 7. Lamp Cover 8. Ventilation Slots 9. HDMI Port 1 10. Control Input 11. Computer/Component Input 13 14 12. Slot for Kensington™ Lock 8 12 13. USB Port (For remote mouse functionality) 15 14. AC Power Cord Connection 11 10 9 15.
Operator’s Guide 3M™ Super Close Projection System SCP725 I/O Module Control Panel (optional accessory) If your projector has the optional I/O Module installed, the projector functions can be operated from the I/O Module Control Panel. ENGLISH 1 # 1 2 3 I/O Module Control Panel ON/OFF Volume +/Source 4 5 6 Menu Arrow Buttons ENTER (Center of Arrow buttons) 2 3 5 4 6 Function Turns the projector on and off Increases (+) or decreases (-) audio level Switches the displayed input source.
Operator’s Guide 3M™ Super Close Projection System SCP725 Bottom Terminal Panel on I/O Module Use the Bottom Terminal Panel to connect the I/O Module box to the Computer/Video source.
3M™ Super Close Projection System SCP725 Operator’s Guide Remote Control Functions Use a USB cable to connect from the PC to the SCP725 or SCP I/O Module (if equipped) and aim the remote control toward the projection screen or at the IR sensor on the projector. Press desired remote control button to send a signal to the projector. ENGLISH Note: This projector is compatible with two remote control transmitters.
Operator’s Guide 3M™ Super Close Projection System SCP725 Installing Batteries in Remote Control ENGLISH 1. Push down on cover to unlatch it. Slide cover off. 2. Install same type of batteries with the correct polarities. 3. Reinstall battery cover. Note: Verify the battery cover is fully latched before using the remote control. [OR] Setup and System Configuration 20 © 3M 2011. All Rights Reserved.
3M™ Super Close Projection System SCP725 Operator’s Guide Operating Instructions Projector Start Up ENGLISH Read the Important Safeguards before operating the SCP725. After all cable connections have been completed, refer to Setup and Configuration, the projector can be powered up. For best results, please observe the following start up sequence. 1. Power ON all of the connected equipment. 2. Plug the supplied power cord into the AC inlet of the projector. 3.
Operator’s Guide 3M™ Super Close Projection System SCP725 ENGLISH Menu Navigation To display the on screen menus, press the MENU button on the remote control or I/O Module. Use the remote control Up/Down ARROW buttons to select the desired menu (see table below), then pull the TRIGGER button (bottom of remote control) to display it. Use the remote control ARROW buttons within a submenu to select the various options displayed on the screen, then pull the TRIGGER button to initiate that option or setting.
Operator’s Guide 3M™ Super Close Projection System SCP725 Input Menu The Input Menu, shown below, is used to select the desired computer or video input source to be displayed on the projector. ENGLISH Input Input Source: Computer 1 ✓ Computer 1 / Component 1 Computer 2 / Component 2 RCA Video S-Video HDMI Feature Main Input Description Select the Input source to be displayed on the projector. 1. Computer 1 / Component 2 [Computer 1 = default] 2.
Operator’s Guide 3M™ Super Close Projection System SCP725 Picture Menu The Picture Menu, shown below, is used to adjust the picture settings to display the best possible image.
Operator’s Guide 3M™ Super Close Projection System SCP725 Advanced Picture Menu The Picture Menu with the Advanced option selected, shown below, is used to adjust the projected image for Computer and Component inputs only.
Operator’s Guide 3M™ Super Close Projection System SCP725 Audio Menu ENGLISH (Menu displays only if I/O Module is connected) The Audio Menu, shown below, is used to adjust the audio settings and select the audio input source to play through the projector.
Operator’s Guide 3M™ Super Close Projection System SCP725 Setup Menu The Setup Menu, shown below, is used to configure the basic projector operating parameters.
Operator’s Guide 3M™ Super Close Projection System SCP725 Advanced Setup Menu The Advanced Setup Menu, shown below, is used to initiate the PIN code feature (turn On/Off) and set the PIN code.
Operator’s Guide 3M™ Super Close Projection System SCP725 Information Menu The Information Menu, shown below, is used to display current projector configuration settings. Input Source: Computer 1 Input Resolution H Frequency V Frequency Lamp Hours System Hours IP Address Net Mask Gateway User Ver. Feature Input Resolution H Frequency V Frequency Lamp Hours System Hours IP Address * (see note) Net Mask * (see note) Gateway * (see note) User Revision ENGLISH Information 1024 x 768 31.
Operator’s Guide 3M™ Super Close Projection System SCP725 Machine Specifications ENGLISH Item Acoustic Noise Level Auto Detect & Install Computer Compatibility Conditions for usage environment Dimensions DMD Native Resolution Focus Input / Output Terminals Input rating Lamp Life Languages Lens Power Consumption Video Compatibility Wall/Ceiling Mount capability Weight Specification Bright Mode: Typical 34 dB(A) Normal Mode: Typical 32 dB(A) ECO Mode: Typical 28.
3M™ Super Close Projection System SCP725 Operator’s Guide Maintenance Lamp Replacement ENGLISH 10 11 12 1 9 8 2 3 7 6 5 4 Hg www.lamprecycle.org Note: Refer to the Setup Menu to reset the lamp hour timer after replacing the lamp. © 3M 2011. All Rights Reserved.
Operator’s Guide 3M™ Super Close Projection System SCP725 Cleaning the Air Vents ENGLISH For best performance, 3M recommends that you periodically dust the projector and vacuum all air vents on the projector. Follow the procedures below. 1. Return projector to standby mode. After the Standby button turns amber and the fan stops, unplug the power cord from the wall outlet. 2.
Operator’s Guide 3M™ Super Close Projection System SCP725 Cleaning the Lamp Module and Lamp Compartment Follow the procedure below. 1. Unscrew lamp module retaining screws and carefully remove lamp module. 2. Vacuum the lamp cavity to remove all dislodged dust. 3. Vacuum the lamp inlet and exhaust vents to clear any dust or dirt build up. 2 1 Note: Do not touch the glass reflector or the bulb.
Operator’s Guide 3M™ Super Close Projection System SCP725 ENGLISH 4. Install the lamp taking care to seat it fully into the lamp socket connection and tighten the lamp retaining screws. 5. Replace the lamp door and secure it with the retaining screws. 6. Verify the projector operates correctly. Plug in power cord and press the standby button to power on projector. Note: If the lamp door is not installed correctly, the projector will not power on. 34 © 3M 2011. All Rights Reserved.
Operator’s Guide 3M™ Super Close Projection System SCP725 Troubleshooting Identifying an Expired Lamp Module 3 2 1 2 3 1 ENGLISH Lamp Module Parts 4 3 5 1. Top of Lamp Module 2. Lamp Connector 3. Air Vents 4. Lamp Wires 5. Bulb Envelope - This is the shape of the bulb inside the lamp module. Visible Indications of an Expired Lamp The following five visible indicators help you recognize an expired lamp. 1. Cloudy Bulb – A cloudy bulb may reduce the image brightness.
Operator’s Guide 3M™ Super Close Projection System SCP725 ENGLISH I/O Module Troubleshooting Symptom The Standby button on the I/O module does not light while the projector is powered on. Possible Cause The communication cable is not connected or is damaged. The projector does not have power. Solution Connect a communication cable (15 pin to 15 pin) from the projector to the I/O module.
Operator’s Guide 3M™ Super Close Projection System SCP725 Symptom Standby Button State Possible Cause The projector is cooling down. The lamp has expired The lamp will not ignite Orange Flashes RED once every second Flashes RED twice every second The lamp will not ignite or has turned off. Flashes RED four times every second © 3M 2011. All Rights Reserved. The lamp ballast may have stopped functioning. There is a problem with one of the cooling fans.
Operator’s Guide ENGLISH Symptom No image 3M™ Super Close Projection System SCP725 Standby Button State Green Noise in the image Green Noise in the computer image Green Possible Cause The desired input source is not selected. The cables from the input source are not connected. The input source is not turned on or not displaying an image. (e.g. If a notebook computer, the external monitor port is not turned on).
Operator’s Guide 3M™ Super Close Projection System SCP725 Symptom Standby Button State The remote control does not work Action Connect an active input source to unit. ENGLISH Desired input source cannot be detected Possible Cause The input source is not active. A signal must be present for the input to be selected. The input device (e.g. computer, DVD player, etc.) is not turned on. The remote control is not facing the remote control sensor.
Operator’s Guide 3M™ Super Close Projection System SCP725 Replacement Parts and Accessories ENGLISH Replacement Parts Name of Part VGA Cable, 1.8 m Remote Control SCP725/SCP725W Lamp Replacement 3M Part Number 78-8134-7029-7 78-8134-7200-4 78-6969-9996-6 Optional Accessories (not shown) Name of Part 3M Fixed Wall Mount SCPFXW.V2 3M Folding Wall Mount with Speakers SCPWMS.
3M™ Super Close Projection System SCP725 Operator’s Guide ENGLISH © 3M 2011. All Rights Reserved.
3M™ Super Close Projection System SCP725 ENGLISH Operator’s Guide 42 © 3M 2011. All Rights Reserved.
3M™ Super Close Projection System SCP725 Operator’s Guide ENGLISH © 3M 2011. All Rights Reserved.
ENGLISH Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
