Use and Care Manual

3M
™
Marine Adhesive
Sealant 5200
• An exceptionally strong, high
performance polyurethane
• Creates extremely strong bonds,
above and below the waterline
• Maintains its exibility, absorbing
shocks, vibrations, swelling,
shrinking and structural
movements
• Tack free in 24-48 hours;
cures in 5-7 days without
shrinking
• Ideal for large surface-
area applications requiring
long open times
The toughest sealants on the sea
Whether you’re bonding trim, toe rails, ttings or berglass deck components, or sealing thru-hulls, hatches,
hinges, trunk joints or almost anything else on a marine vessel, 3M has an adhesive sealant that’s proven to the
task. Our products have set the standard for marine excellence for more than 50 years, and they now include a
new generation of advanced polyurethane and silane-modied polymers (SMPs) that further expand their range
and effectiveness.
3M
™
Marine Adhesive Sealants are specically designed for the rigors of the marine environment, bonding or
sealing everything from wood, metal and glass to gelcoat and most plastics—including ber-reinforced plastic
(FRP). Boaters have no better friend on the water.
3M
™
Marine Adhesive
Sealant Fast Cure 5200
• Fast-cure version of 3M
™
Marine
Adhesive Sealant 5200
• Tack free in 1 hour; completely cures
within 24 hours
• Ideal for applications requiring a fast,
long-term seal, above or
below waterline:
- hull to deck seams
- wood to berglass
- marine hardware
- hull and stern joints
3M
™
Marine Adhesive
Sealant 3000 UV
• A single-component, elastomeric
sealant that cures without isocyanates
• Excellent cosmetic sealant; will not
degrade when exposed to UV
• Low VOC, 50-minute skin time,
paintable when wet
• Ideal for port hole and general
cosmetic seam sealing