3M Micro Professional Projector ™ MPro110 Operator’s Guide
Operator’s Guide 3M™ Micro Professional Projector MPro110 Contents Intended Use Statement.......................................................................................... 3 Trademarks and Copyrights..................................................................................... 3 Safety Information................................................................................................... 3 Safety Labels..................................................................................
Operator’s Guide 3M™ Micro Professional Projector MPro110 Intended Use Statement The 3M™ Micro Professional Projector MPro110 is designed to operate with the 3M-specified battery and 3M battery charger and in a normal office and home environment.
Operator’s Guide 3M™ Micro Professional Projector MPro110 m Warning To reduce the risk associated with hazardous voltage: • Do not modify this product in any way. Use only 3M approved replacement components. • Do not attempt to service this projector other than battery replacement. There are no user serviceable parts other than the battery. Service to be performed only by a 3M-authorized service provider using 3M-approved system components. • Do not use the wall power supply in a wet environment.
Operator’s Guide 3M™ Micro Professional Projector MPro110 Safety Labels CLASS 1 LED PRODUCT FCC STATEMENT - CLASS B This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications.
Operator’s Guide 3M™ Micro Professional Projector MPro110 INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC equipment provided that the following conditions are met. The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Operator’s Guide 3M™ Micro Professional Projector MPro110 Package Contents 1 Projector 2 Battery Charger/AC Adapter 3 Video Cable 4 VGA Cable 5 Battery 6 RCA Adapter 1 Note: In some regions, the battery charger/AC adapter will come with an outlet adapter. Parts 1 Focus Wheel 2 Lens 3 Power On/Off 4 Video IN 5 VGA IN 6 Power and Charge LEDs 7 DC Power IN 3 4 5 6 1 3 2 6 4 5 © 2008 3M. All Rights Reserved.
Operator’s Guide 3M™ Micro Professional Projector MPro110 Getting Started Install Battery The 3M MPro110 comes with a rechargeable Lithium-Ion (Li-Ion) battery. The battery should be charged before using the projector with the battery. Important Note: Switch projector OFF and disconnect all cables before installing the battery. Use only the 3M-specified battery: 78-6969-9974-3. To install the battery: remove screw, slide the back cover off, insert the battery, and reinstall the cover.
Charge the Battery The 3M MPro110 comes with a battery charger/AC adapter. Use the battery charger/AC adapter to power the projector when the battery is not charged or installed and to charge the battery. When the battery needs charging, the image will turn black and the Power LED will flash red. To charge the battery: (1) Turn the power switch OFF. (2) Connect the battery charger/AC adapter to the projector’s DC in. (3) Plug the battery charger/AC adapter into an electrical outlet.
Operator’s Guide 3M™ Micro Professional Projector MPro110 Operating Instructions Connecting to a Video Source There are many devices that output video signals: digital cameras, video phones, and portable video players. The 3M MPro110 can project the video from these devices using its video port. (1) Connect the included video cable to the projector (2) Connect the video cable to the video source’s cable or the video output port.
Connecting to a Computer Video Source There are several types of computers that output a video signal: desktop computers, laptop computers, ultra-portable computers and some personal digital assistants (PDAs). The 3M MPro110 can project the video from these devices using its VGA port. (1) Connect the included VGA Cable to the projector. (2) Connect the VGA Cable to the device’s video output. Powering On Slide the power switch to the ON position.
Operator’s Guide 3M™ Micro Professional Projector MPro110 Image Size Increase or decrease the projector-to-wall distance 305 mm (12 in) to 1800 mm (71 in.) to project an image ranging from 163 mm to 975 mm (6.4 in. to 38.4 in.) wide. Projector-To-Wall Distance Image Width 305 mm (12 in) 163 mm (6.4 in) 610 mm (24 in) 235 mm (9.3 in) 914 mm (36 in) 355 mm (14 in) 1219 mm (48 in) 523 mm (20.6 in) 1524 mm (60 in) 739 mm (29.1 in) 1800 mm (71 in) 975 mm (38.
Operator’s Guide 3M™ Micro Professional Projector MPro110 Troubleshooting Problem Cause Solution Image is fuzzy Projector-to-screen distance outside of limits. Image not focused. Place projector 200–1800 mm from wall. Turn focus to sharpen image. Does not run on battery power Battery not charged. Battery needs replacement. Plug in AC adapter and turn power switch Off to charge battery. Replace battery if it will not hold a charge. Blank image Power is off. Projector in Power Saver Mode.
Operator’s Guide 3M™ Micro Professional Projector MPro110 Specifications Projector Description Imager Specification Technology LCOS Size 11.9 mm (0.47") Image Resolution 640 x 480 Pixels Image Aspect Ratio 4:3 Projection Distance 305–1800 mm (12"–70") Image Size 163–975 mm (6.4"–38.4") Throw Ratio (Width/Distance) 0.
Operator’s Guide 3M™ Micro Professional Projector MPro110 NK03-S005 Rechargeable Lithium-Ion Battery Description Specification Type Rechargeable Lithium-ion Battery Rated Capacity 3.7 V/ 1050mAh Dimensions 40.4 x 34.4 x 9.4 mm (1.6” x 1.4” x 0.4”) Do not throw battery into trash.
Operator’s Guide 3M™ Micro Professional Projector MPro110 Limited Warranty • The 3M™ Micro Professional Projector MPro110 (the “3M product”) is warranted to be free from defects in material or manufacture for a period of 90 days from the date of purchase. • All other accessories included with the 3M product are warranted to be free from defects in material or manufacture for a period of 90 days from the date of purchase.
b. 3M product is designed to operate in the typical indoor environment. This warranty does not cover 3M product used outside of the following circumstances: • 100V–240V AC, 50/60 Hz • 10˚–27˚C (50˚–80˚F) • 10–80% RH (without condensation) • 0–1828m (0–6000 feet) above sea level c. The air intake and exhaust vent must be clear of obstructions. Inadequate air ventilation will cause the 3M product to malfunction or will cause damage to the 3M product which will void the warranty. d.
Operator’s Guide 3M™ Micro Professional Projector MPro110 EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE OR BUSINESS) RESULTING FROM, OR IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This limitation applies regardless of the legal theory upon which damages are sought.
3M is a trademark of 3M Company. Projection Systems 3M Austin Center 6801 River Place Blvd. Austin, TX 78726-9000 866-631-1656 www.3M.com/meetings e-mail: meetings@mmm.com Please recycle. Printed in Taiwan. © 3M 2008. All rights reserved.
