MSDS

MATERIAL SAFETY DATA SHEET 3M Fire Barrier MP+ Stix 03/06/2008
_________________________________________________________________________________________________
Page 4 of 7
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Butyl Rubber, Neoprene, Nitrile Rubber.
8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
Glass Wool 3M TWA, as dust 10 mg/m3
ROSIN ACGIH TWA Reduce
exposure to as
low as possible
Sensitizer, see limit column
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form:
Putty
Odor, Color, Grade:
Red putty with negligible odor
General Physical Form:
Solid
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
Not Applicable
Specific Gravity
1.25 [Ref Std: WATER=1]
Melting point
Not Applicable
Solubility In Water
No Data Available
Volatile Organic Compounds
0 % weight
Percent volatile
5 %
VOC Less H2O & Exempt Solvents
0 g/l
SECTION 10: STABILITY AND REACTIVITY