Installation Manual

3M Fire Barrier MPP+ Moldable Putty Pads
Installation Instructions For UL Listed Metallic and Non-metallic Outlet Boxes
Refer to the Wall Opening Protective Material (CLIV) listing in either the 3M Fire Protection Products
Applications and Specifiers Guide or the UL Fire Resistance Directory Volume 1 for MPP+ Moldable Putty Pad
application on UL Listed metallic and nonmetallic outlet boxes. No special skills or tools are required. To
ensure adequate adhesion, all surfaces shall be clean and free of dust, grease, oil, loose materials, rust or
other substances.
Step 1: Remove liner from both sides of pad.
Step 2: UL Listed metallic or nonmetallic outlet
boxes (refer to above listing)
Step 3: Starting at top, align to front edge of box and
overlap onto the stud 1/2 inch (13 mm).
Step 4: Adhere remaining pad to box and cut to
provide a snug fit around conduits or cables.
Step 5: Extra putty will pleat at corners after pad has
been applied to surface of box.
Step 6: Trim excess putty from corners and apply it
to conduit fittings or cables connected to the box.
Ensure pad is pressed firmly to surface of top, back,
bottom, and side of box.
Consumer Safety and Light Management
3M Center 223-2N-21
St. Paul, MN 55144-1000
[phone]
3
Printed in U.S.A. MCS 210508
© 3M 2002 98-0400-5061-3 (August 2001)
Warranty and Limited Remedy. This product will be free from defects in material and manufacture for a period of ninety (90) days from date of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for
determining whether the 3M product is fit for a particular purpose and suitable for user’s method of application. If this 3M product is proved to be defective within the warranty period
stated above, your exclusive remedy and 3M’s sole obligation shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the product.
Limitation of Liability. Except where prohibited by law, 3M will not be liable for any loss or damages arising from the use of this 3M product, whether direct, indirect, special,
incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.