3 Fire Barrier Moldable Putty+ Product Data and Installation Instructions FM APPROVED
1. Product Description 3MTM Fire Barrier Moldable Putty+ consists of a synthetic elastomer designed for use as a one part, intumescent fire resistive putty used to restore the integrity of fire rated building construction. Up to a four hour fire rating is achieved when tested in accordance with the time/temperature curves and water hose stream tests of UL 1479 and ASTM E 814.
Refer to following page for instructions on installing MPP+ Moldable Putty Pads and Moldable Putty+ Cable Wraps. Moldable Putty+ Pads are available 4 x 8 x 1/8 inch pads (102 mm x 203 mm x 3,2mm) and are packaged 10 pads per box, 10 boxes per carton and in 7 x 7 x 1/8 inch pads (178 mm x 178 mm x 3,2 mm), 9.5 x 9.5 x 1/8 inch pads (241,3 mm x 241,3 mm x 3,2 mm), and are packaged 20 per box and 5 boxes per carton. Moldable Putty+ Cable Wraps are available 2 in. x 8 in. x i/8 in.
3M Fire Barrier MPP+ Moldable Putty Pads Installation Instructions For UL Listed Metallic and Non-metallic Outlet Boxes Refer to the Wall Opening Protective Material (CLIV) listing in either the 3M Fire Protection Products Applications and Specifiers Guide or the UL Fire Resistance Directory Volume 1 for MPP+ Moldable Putty Pad application on UL Listed metallic and nonmetallic outlet boxes. No special skills or tools are required.
