Cut Sheet

Color:
Dark Red
Nominal Density:
10–12 lbs./gal. (1.2–1.45kg/L)
Nominal Thickness:
1/10 in. (2.54mm)
Surface Burning (ASTM E 84): Flame Spread 0, Smoke Development 0
Heat Expansion:
Begins at 350°F (177°C)
Significant at 400°F (204°C)
Free Expansion is Nominal 3 times
STC (ASTM E 90 and ASTM E 413):
Tested in STC 53 rated wall assembly
52 when tested on back-to-back
electrical boxes
VOC Less H
2
O and Exempt Solvents:
< 250g/L
Dimensions: 4 in. x 8 in. x 1/10 in. (101.6mm x 203.2mm x 2.5mm)
Unit Volume: 2.52 in.
3
(41.4cm
3
)
Unit Weight: 2.7 oz (76g)
Dimensions: 7 in. x 7 in. x 1/10 in. (177.8mm x 177.8mm x 2.5mm)
Unit Volume: 4.63 in.
3
(76.0cm
3
)
Unit Weight: 4.1 oz (116g)
Dimensions: 9.5 in. x 9.5 in. x 1/10 in. (241.3mm x 241.3mm x 2.5mm)
Unit Volume: 6.1 in.
3
(139.8cm
3
)
Unit Weight: 7.6 oz (215g)
4. Performance & Typical Physical Properties
9. Safe Handling Information
Consult product's Material Safety Data Sheet (MSDS) from country-of-use prior to handling and disposal.
Important Notice to User:
Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are
reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and
control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product,
user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty
and Limited Remedy: 3M warrants that each 3M Fire Protection Product will be free from defects in material and manufacture for 90 days from the date of purchase from
3M’s authorized distributor. 3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If a 3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the
purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special,
incidental or consequential, regardless of the legal theory asserted.
Please Recycle. Printed in U.S.A. © 3M 2015. All rights reserved. Reference Number 98-0213-4620-4 RevB
3M is a trademark of 3M Company. Used under license in Canada. LEED is a trademark of U.S. Green Building Council Non-Profit Corporation.
All other trademarks are the property of their respective owners.
5. Packaging, Storage, Shelf Life
Packaging: Corrugated cardboard box with liner between individual pads.
Storage: 3M
™
Fire Barrier Moldable Putty Pads MPP+ should be stored indoors in dry conditions.
Shelf Life: 3M
™
Fire Barrier Moldable Putty Pads MPP+ shelf life is indefinite in original unopened containers. Product will not dry or crumble in opened
containers. Normal stock and stock rotation practices are recommended.
6. Installation Techniques
Preparatory Work: The surface of the electrical box, or opening and any penetrating items should be cleaned (i.e. free of dust, grease, oil, loose materials, rust or
other substances) to allow for the proper adhesion of the 3M
™
Fire Barrier Moldable Putty+ Pad. Ensure that the surface of the substrates are not
wet and are frost-free.
Installation Details: Electrical boxes must be firestopped under the following conditions: boxes larger than 16 sq. in. (103 sq. cm), if horizontal spacing between
boxes is less than 24 in. (609.6mm), when multiple boxes are located in one stud cavity or if the aggregate of all boxes exceeds 100 sq. in.
per 100 sq. ft. (645 sq. cm. per 9.29 sq. m) — refer to listed system details and applicable local building code requirements. For electrical box
installations, a minimum of 1/10 in. (2.5mm) thick putty application is required. 3M
™
Fire Barrier Moldable Putty Pads MPP+ are to be installed
to completely cover the exterior of the outlet box (except for the side against the stud). To firestop penetrations, install the applicable depth of
backing material (if required), remove the desired amount of putty from the pad, form (if necessary) and install as detailed within the listed
system. Make sure that putty is in complete contact with the substrate and penetrating item(s).
Note: Partial pads can be pieced together and the seams between partial pads should overlap a minimum of 1/8 in. with the seams
worked with the fingertips to create adhesion at the seam.
Limitations: Over application (i.e., using excessive amount of material) of product to vertical surfaces may cause sagging, follow system details. Product is
not impaired by freezing but should be warmed to 32°F (0°C) before applying.
Consult a 3M Authorized Fire Protection Products Distributor / Dealer or Sales Representative for
Applicable UL, Intertek or other third-party drawings and system details.
7. Maintenance No maintenance is expected when installed in accordance with the applicable UL, Intertek, FM or other third-party listed system.
Once installed, if any section of the 3M
™
Fire Barrier Moldable Putty Pad MPP+ is damaged, the following procedure will apply: remove damaged putty, clean the
affected area and install the proper thickness of putty, ensuring it bonds to the substrate and adjacent putty (product from damaged area can be reused if it is free from
contaminants). Putty can be molded together at new/existing putty overlap.
8. Availability 3M
™
Fire Barrier Moldable Putty Pads MPP+ are available from 3M Authorized Fire Protection Products Distributors and Dealers.
3M
™
Fire Barrier Moldable Putty Pads MPP+ are available in the following sizes: (10 pads/pack, 10 packs/case) 4 in. x 8 in. x 1/10 in. (101.6mm x 203.2mm x 2.5mm),
(20 pads/case) 7 in. x 7 in. 1/10 in. (177.8mm x 177.8mm x 2.5mm), (20 pads/case) 9.5 in. x 9.5 in. 1/10 in. (241.3mm x 241.3mm x 2.5mm); red-colored firestop material.
For additional technical and purchasing information regarding this and other 3M Fire Protection Products, please call: 1-800-328-1687 or visit www.3M.com/firestop.
Industrial Adhesives
and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-328-1687
877-369-2923 (Fax)
www.3M.com/firestop